Pine Veneer Sheets
Thin sheets of pine wood, sawn lengthwise and sliced to a thickness not exceeding 6 mm, typically planed and sanded for smoothness. Used primarily for veneering furniture and plywood panels. Classified under HTS 4408.10.01 as coniferous wood veneer sheets meeting the thickness and processing criteria.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness exceeds 6 mm
Thicker coniferous sawn wood falls under 4407 as lumber or planks, not veneer sheets.
If sourced from non-coniferous species like oak
Non-coniferous veneer sheets are classified separately under 4408.90.01.
If further processed into plywood panels
Completed plywood with coniferous face veneers moves to Chapter 44 heading 4412.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as coniferous (e.g
• pine) with phytosanitary certificates to avoid reclassification
• Measure thickness precisely; exceeding 6mm shifts to 4408.90 or Chapter 44 planks
• Declare if end-jointed or spliced accurately, as this affects value and duty calculations
Related Products under HTS 4408.10.01
Spruce Plywood Veneer
Sliced spruce wood sheets, peeled to under 6 mm thickness, often sanded for uniform application in laminated wood products. Ideal for interior plywood facing and cabinetry veneering. Fits HTS 4408.10.01 due to coniferous origin and veneer specifications.
Western Hem-Fir Sliced Veneer
Hem-fir wood sliced lengthwise into thin sheets not exceeding 6 mm, planed for edge matching in veneering applications. Sourced from mixed hemlock-fir stands, used in structural plywood. Qualifies under HTS 4408.10.01 as processed coniferous veneer.
FSC Certified Spruce Veneer
Sustainably sourced spruce sheets, sliced and sanded to under 6 mm for eco-friendly plywood facing. Certified by Forest Stewardship Council for traceability. HTS 4408.10.01 for coniferous veneers, certification aids compliance.
Planed Larch Veneer Sheets
Larch coniferous wood peeled and planed to precise ≤6 mm thickness for high-end furniture veneering. Provides durable, attractive grain patterns. HTS 4408.10.01 applies to this processed form.
Spliced Douglas Fir Veneer
Douglas fir veneer sheets spliced side-by-side, sliced to 0.5-6 mm for seamless large panels in millwork. Sanded for paint adhesion. Perfect fit for HTS 4408.10.01 coniferous category.
S-P-F Mixed Veneer Sheets
Mixed spruce-pine-fir veneer sliced from S-P-F stands to ≤6 mm, per subheading note 4407.13 logic. Used in engineered wood products. HTS 4408.10.01 for coniferous processing.