Sanded Mahogany Lumber 12mm Thick
Genuine mahogany (Swietenia spp.), nonconiferous tropical hardwood, lengthwise sawn, sliced, sanded to 12mm thickness. Falls under HTS 4407.99.02.95 for other nonconiferous sawn wood >6mm, suitable for boatbuilding and cabinetry. Requires strict documentation due to CITES Appendix II listing.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If imported in rough, unplaned state without lengthwise sawing
Unprocessed wood logs/rough timber classified under heading 4403.
If density exceeds 0.8 g/cm³ and used for specific applications
High-density molded wood products move to heading 4413.
If worked beyond planing into articles like handles or moldings
Further fabrication into specific wood articles shifts to 4421.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Secure CITES export/import permits from both origin and USFWS before shipment
• Use scientific names (e.g
• Swietenia macrophylla) in commercial invoice for CBP verification
• Test for Lacey Act declarations to confirm legality of harvest and trade chain
Related Products under HTS 4407.99.02.95
Sliced Teak Lumber 8mm Thick
Teak wood (Tectona grandis), a nonconiferous hardwood, sawn lengthwise and sliced to a thickness of 8mm, sanded for smoothness. Classified under HTS 4407.99.02.95 as nonconiferous wood exceeding 6mm thickness, not further processed into specific products. Ideal for high-end furniture and flooring applications.
Planed Ipe Decking Boards 20mm
Ipe hardwood (Handroanthus spp.), nonconiferous, sliced lengthwise, planed and sanded to 20mm thickness for outdoor decking. Meets HTS 4407.99.02.95 criteria as nonconiferous sawn wood over 6mm, end-jointed for stability. Known for extreme durability in marine environments.
End-Jointed Wenge Sawn Wood 15mm
Wenge (Millettia laurentii), nonconiferous African hardwood, sawn lengthwise, end-jointed, sanded to 15mm thickness. HTS 4407.99.02.95 applies to this other nonconiferous wood >6mm for musical instruments and decorative paneling. Features distinctive dark streaks.
Sliced Ebony Veneer Lumber 10mm
Ebony (Diospyros spp.), dense nonconiferous wood, sliced lengthwise to 10mm thickness, lightly sanded for musical instrument backs. HTS 4407.99.02.95 covers this other nonconiferous sawn wood exceeding 6mm before final veneering. Prized for jet-black color.
Planed Jatoba Hardwood Planks 25mm
Jatoba (Hymenaea courbaril), nonconiferous Brazilian cherry-like wood, lengthwise sawn and planed to 25mm for flooring stock. Fits HTS 4407.99.02.95 as other nonconiferous wood >6mm, sanded surface ready for milling. Reddish-brown with interlocking grain.
Sanded Padauk Sawn Timber 18mm
Burmese padauk (Pterocarpus macrocarpus), nonconiferous hardwood, sawn lengthwise, sanded to 18mm for turnery and joinery. HTS 4407.99.02.95 for other nonconiferous >6mm wood, noted for orange-red color that weathers to purple. CITES-regulated species.