Planed Western Red Alder 2x4 Boards
Thickness-planed western red alder boards nominally 2x4 inches (actual ~1.5x3.5), sawn lengthwise exceeding 6mm thick, kiln-dried and end-jointed for stability. Fits HTS 4407.99.0263 for other sawn/planed alder wood not coniferous. Commonly used in furniture framing and cabinetry.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If red alder but not specifically Western origin
General red alder subheading applies if botanical sourcing doesn't confirm Pacific Coast Alnus rubra.
If further manufactured into plywood panels
Plywood with alder face veneers shifts to heading 4412 for laminated wood products.
If chemically treated for preservation
Wood preserved against decay or insects via pressure treatment moves to heading 4409.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include kiln-drying certificates to prove moisture content below 19%; label with exact species and dimensions; avoid shipments with defects exceeding allowable tolerances
Related Products under HTS 4407.99.02.63
Western Red Alder Lumber 1x6
Sawn western red alder (Alnus rubra) lumber measuring 1 inch thick by 6 inches wide, planed and sanded for smooth finish, exceeding 6mm thickness. Classified under HTS 4407.99.0263 as sawn or chipped lengthwise wood of this specific species, not further manufactured. Ideal for custom millwork and interior applications due to its attractive grain.
Sanded Western Red Alder Planks 1x12
Wide sawn western red alder planks 1 inch thick by 12 inches wide, sanded both faces for fine woodworking, thickness over 6mm. HTS 4407.99.0263 covers this non-coniferous hardwood sawn lengthwise. Popular for tabletops, shelving and decorative paneling.
Kiln-Dried Western Red Alder S4S Lumber
Surfaced four sides (S4S) western red alder lumber, sawn and machined to precise dimensions exceeding 6mm thickness. Precisely matches HTS 4407.99.0263 for planed/sanded Alnus rubra wood. Essential for high-end furniture and millwork production.
Western Red Alder Quarter-Sawn Boards
Quarter-sawn western red alder boards sliced lengthwise for ray fleck pattern, planed thickness exceeding 6mm. HTS 4407.99.0263 applies to this premium sawn hardwood processing. Used in musical instruments and architectural joinery.
FAS Grade Western Red Alder Lumber
First and Seconds (FAS) grade western red alder sawn lumber, selected for minimal defects, planed and exceeding 6mm thick. Falls squarely under HTS 4407.99.0263 for high-quality Alnus rubra softwood. Preferred for visible furniture components.
Western Red Alder Cabinet Blanks
Rough-sawn western red alder blanks cut to cabinet door dimensions, thickness exceeding 6mm, sanded edges only. HTS 4407.99.0263 for sawn/planed Alnus rubra not further worked. Ready for final machining in cabinet shops.