Planed Walnut Timber 2x4x10 ft
Planed and end-jointed walnut (Juglans spp) timber planks, 2x4x10 feet, suitable for furniture framing. Meets HTS 4407.99.0261 criteria as sawn lengthwise wood exceeding 6mm thickness with minimal end-jointing permitted.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If tropical walnut species
Tropical hardwood walnuts classified under coniferous/non-coniferous subheading 4407.29 vs temperate 4407.99.
If extensively end-jointed into beams
Assembled wooden beams/posts from sawn walnut exceed heading 4407 scope, enter reconstructed wood category.
If in wood chips form
Chipped walnut wood (not sawn lengthwise) falls under fuel/rough wood heading 4401.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Provide mill certificates showing no chemical treatments that would classify as 'further worked' under 4407 exclusions
• End-jointing allowed but excessive finger-jointing may push to 4418; document jointing process
• Source from certified sustainable forests to preempt Lacey Act declarations
Related Products under HTS 4407.99.02.61
Black Walnut Sawn Lumber 1x6x8 ft
Sawn lengthwise black walnut (Juglans nigra) boards measuring 1 inch thick by 6 inches wide by 8 feet long, planed and sanded for smoothness. Thickness exceeds 6 mm, classified under HTS 4407.99.0261 as walnut wood sawn or chipped lengthwise, not further manufactured beyond basic planing/sanding.
Sanded Black Walnut Planks 4/4x8x12 ft
Thickness-sanded 4/4 (nominal 1-inch) black walnut planks, 8 inches wide by 12 feet long, for high-end cabinetry. Classified in 4407.99.0261 as Juglans sawn lumber exceeding 6mm, sanded but not machined to shape.
End-Jointed Walnut Board 1x8x16 ft
Finger end-jointed walnut boards creating 16-foot lengths from shorter stock, 1x8 inch profile. Qualifies for HTS 4407.99.0261 as sawn walnut >6mm with permitted end-jointing for stability.
Quartersawn Walnut Lumber 5/4x6x10 ft
Quartersawn black walnut lumber (5/4 thickness x 6in x 10ft) prized for stability in musical instruments. Sawn lengthwise exceeding 6mm, lightly planed, fits HTS 4407.99.0261 Juglans classification.
FSC Certified Walnut Planks 8/4x10x12 ft
FSC-certified thick (8/4) walnut planks for live-edge table tops, sawn, planed one face. Exceeds 6mm thickness requirement for HTS 4407.99.0261 walnut sawn wood category.
Bookmatched Walnut Panels 3/4x24x96 in
Bookmatched walnut panels (3/4in thick x 24in x 8ft) for veneer matching in cabinet doors. Sawn lengthwise >6mm with sanding, properly classified HTS 4407.99.0261.