Poplar Sawn Lumber 1x6 Boards
Sawn lengthwise poplar lumber boards measuring 1 inch thick by 6 inches wide, exceeding 6 mm thickness, planed on all four sides for smooth finish. Classified under HTS 4407.97.00 as sawn or chipped wood of poplar (Populus spp.) species, not further manufactured. Ideal for furniture framing and cabinetry construction.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If bark present or not trimmed
Rough wood in log form or with bark falls under heading 4403, not sawn/planed products.
If density under 0.5 g/cm³ and further processed into plywood
Poplar density qualifies for specific plywood classification when laminated into panels.
If coniferous species misidentified
Coniferous sawn wood uses separate subheading; species verification prevents errors.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain phytosanitary certificate confirming poplar/aspen species and heat treatment per ISPM 15 for fumigation compliance
• Verify thickness exceeds 6 mm with caliper measurements; thinner boards shift to Chapter 44 veneers
• Include mill certificates documenting sawn lengthwise process to avoid reclassification as rough wood under 4403
Related Products under HTS 4407.97.00
Aspen Planed Edge-Glued Panels
Populus tremula aspen wood panels edge-glued and end-jointed, sanded smooth, thickness 19 mm for tabletop blanks. Meets HTS 4407.97.00 as sawn/peeled poplar/aspen wood exceeding 6 mm, end-jointed permitted. Used in crafting butcher blocks and cutting boards.
Poplar Sliced Flitch for Guitar Backs
Quarter-sawn poplar flitch sliced lengthwise into 8 mm thick sheets, sanded for musical instrument backs. HTS 4407.97.00 covers sliced poplar wood exceeding 6 mm thickness, whether planed/sanded. Lightweight tonewood prized for acoustic guitar construction.
Aspen Sawn Drawer Sides 12 mm Thick
Kiln-dried aspen (Populus tremula) sawn to 12 mm x 100 mm x 500 mm for furniture drawer sides, planed smooth. Fits HTS 4407.97.00 as sawn poplar/aspen lumber exceeding 6 mm, end-jointed optional. Dimensionally stable for cabinet hardware applications.
Poplar End-Jointed Studs 2x4
Finger-jointed poplar 2x4 studs, 38 mm x 89 mm x 8 ft, sanded for interior framing. HTS 4407.97.00 includes end-jointed sawn poplar wood over 6 mm thickness. Structural grade for non-load-bearing residential construction.
Hybrid Poplar Sawn Planks for Picture Frames
Fast-growth hybrid poplar (Populus deltoides x nigra) sawn planks 16 mm thick, planed for moulding stock. Classifies HTS 4407.97.00 as sawn/chipped poplar species wood exceeding 6 mm. Paint-grade lumber accepts finishes well for frame production.
Aspen Sliced Tabletop Blanks
Quartersawn aspen sliced into 20 mm thick matched panels for round tabletop blanks, sanded. HTS 4407.97.00 for sliced/peeled aspen (Populus tremula) exceeding 6 mm thickness. Bookmatched grain pattern enhances dining furniture aesthetics.