Poplar Sliced Panels for Furniture
Sliced lengthwise poplar panels, sanded surface, thickness 8mm for flat-pack furniture components. HTS 4407.97.00.79 applies to this 'other poplar' sawn/sliced wood from Populus spp., not cottonwood. Used in wardrobe and shelving assembly.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sliced into veneer sheets ≤6mm
Veneer classification based on thickness threshold regardless of species.
If fiberboard density <0.5 g/cm³ from poplar chips
Processed into densified wood panels under heading 4411, not sawn lumber.
If coniferous species like pine mistaken for poplar
Coniferous sawn wood in separate heading 4407.11 from deciduous poplar.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include mill certificate specifying slicing method and species; ensure no chemical treatments triggering pesticide declarations; check for dimension tolerances to confirm >6mm
Related Products under HTS 4407.97.00.79
Poplar Sawn Lumber 1x6 Boards
Kiln-dried poplar lumber sawn lengthwise into 1-inch by 6-inch boards, planed and sanded for smoothness, with thickness exceeding 6mm. Classified under HTS 4407.97.00.79 as sawn poplar wood (Populus spp.) that is other than cottonwood, meeting the specific coniferous/excluded species criteria. Ideal for furniture framing and cabinetry construction.
Aspen Planed Lumber 2x4 Studs
Planed aspen (Populus tremula) lumber cut into 2x4 stud dimensions, end-jointed for stability, thickness over 6mm. Falls under HTS 4407.97.00.79 as 'other' Populus spp. wood, specifically aspen excluding cottonwood variants. Commonly used in interior framing and millwork.
Cottonwood Sawn Boards Excluded Variant
Sawn cottonwood (Populus deltoides) boards, planed, 12mm thick for crafting. While Populus spp., HTS 4407.97.00.79 specifies 'other poplar; aspen; cottonwood' capturing this excluded pure cottonwood form. Suitable for boxes and crates.
Poplar End-Jointed Lumber Beams
End-jointed poplar beams, sawn lengthwise, sanded, 25mm thick for structural use. Classifies in HTS 4407.97.00.79 as allowed end-jointed 'other poplar' exceeding 6mm thickness. Applied in beam elements for non-load-bearing interiors.
Aspen Peeled Veneer Lumber Sheets
Peeled aspen sheets, 10mm thick, sanded for face framing. HTS 4407.97.00.79 covers peeled Populus aspen wood 'other' than cottonwood, thickness >6mm. Used in decorative panel overlays.
Hybrid Poplar Sawn Planks
Sawn hybrid poplar (Populus hybrids) planks, planed, 15mm thick for flooring underlay. Fits HTS 4407.97.00.79 as 'other poplar' from Populus genus, excluding cottonwood. Provides stable base for hardwood overlays.