Sliced Birch Veneer Backing 8mm
Sliced birch wood sheets from Betula spp., 8mm thick, used as core backing for laminated panels, sliced lengthwise. HTS 4407.96.00 covers sliced or peeled birch wood exceeding 6 mm thickness, whether planed or not.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If ≤6 mm or further layered
Thinner sheets or veneer ≤6 mm go to 4408; layered to 4408.90.
If pressure-laminated into blockboard
Laminated wood blocks classify under 4412.94 regardless of species.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain fumigation certificates; document slicing method to distinguish from thin veneer; check for end-joints that could affect duty treatment
Related Products under HTS 4407.96.00
Sawn Birch Lumber 1x6
Kiln-dried sawn birch lumber measuring 1 inch thick by 6 inches wide, sourced from Betula spp., with thickness exceeding 6 mm after planing. Classified under HTS 4407.96.00 as sawn or chipped lengthwise wood of birch, planed but not further worked. Ideal for interior furniture framing and cabinetry construction.
Planed Birch Planks 2x4
Planed and sanded birch planks in nominal 2x4 dimensions from Betula spp., thickness exceeding 6 mm, suitable for custom furniture. Falls under 4407.96.00 as lumber sawn lengthwise, planed or sanded, specifically of birch species.
End-Jointed Birch Studs
Finger-jointed birch studs from Betula spp., sawn to 2x4 dimensions exceeding 6 mm thick, for structural interior use. Classified in 4407.96.00 as end-jointed sawn birch wood, planed and sanded.
Sanded Birch Flooring Blanks
Rough sawn birch boards sanded on faces, 19mm thick from Betula spp., prepared as blanks for hardwood flooring. Under HTS 4407.96.00 for sanded sawn birch exceeding 6 mm, not yet profiled.
Birch Wood Beam 4x6 Planed
Planed birch timber beams 4x6 inches from Betula spp., sawn lengthwise with thickness over 6 mm, for beam applications in construction. HTS 4407.96.00 applies to all sawn or planed birch lumber of this specification.
Peeled Birch Lumber Sheets
Birch wood sheets peeled rotationally from Betula spp. logs, minimum 7mm thick, planed for flatness, used in panel production. Fits 4407.96.00 as peeled birch wood exceeding 6 mm thickness.