Hard Maple Lumber 4/4 Thickness
Sawn hardwood lumber from Acer saccharum (hard maple), thickness exceeding 6mm, typically planed and sanded for woodworking. Classified under 4407.93.00 as sawn or chipped lengthwise, of maple species, exceeding 6mm thickness. Used primarily for furniture and cabinetry due to its durability and fine grain.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If from non-maple hardwood species
Other coniferous or hardwood species not specifically Acer fall under the general 'other' subheading.
If thickness ≤6mm after final processing
Sliced or peeled sheets ≤6mm thick are classified in 4408, regardless of maple origin.
If further machined into profiled or molded edges
Plywood or profiled lumber with working edges moves to Chapter 44 heading 4412.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Acer spp. with CITES documentation if applicable; ensure thickness exceeds 6mm post-planing to avoid reclassification; measure moisture content for kiln-dried claims under 20%
Related Products under HTS 4407.93.00
Soft Maple Sawn Boards 8/4 Quarter Sawn
Quarter-sawn lumber from red or silver maple (Acer rubrum/rubescens), planed and end-jointed, thickness over 6mm. Meets 4407.93.00 criteria as lengthwise sawn maple wood not further manufactured. Ideal for flooring and decorative paneling.
Sugar Maple Planed Lumber 6/4 FAS Grade
First and Seconds (FAS) grade sugar maple (Acer saccharum) lumber, sanded and planed, sawn lengthwise with thickness >6mm. Fits HTS 4407.93.00 as unfinished maple wood sawn or chipped. Premium choice for high-end furniture and musical instruments.
Birdseye Maple Sawn Planks 5/4 Thickness
Characteristic birdseye figured hard maple (Acer saccharum) sawn planks, lightly planed, exceeding 6mm thickness. Classified in 4407.93.00 due to maple species and sawn lengthwise processing without further manufacture. Sought after for custom cabinetry and specialty furniture.
Quilted Maple Lumber Rough Sawn 8/4
Rough sawn quilted figure soft maple boards from Acer species, thickness exceeding 6mm, not planed. Meets 4407.93.00 as basic sawn maple wood prior to finishing. Popular for guitar bodies and artistic woodworking projects.
Curly Maple Planed Boards 4/4 Select Grade
Select grade curly figured hard maple (Acer saccharum) boards, planed smooth, sawn lengthwise over 6mm thick. HTS 4407.93.00 applies to this unfinished specialty maple lumber. Valued for violins, fine furniture, and architectural millwork.
Eastern Soft Maple Sawn Lumber 6x8 Dimensions
Dimensional lumber from eastern soft maple species (Acer spp.), sawn to 6"x8" profile, thickness >6mm. Classified under 4407.93.00 as maple sawn lengthwise, whether planed or not. Suitable for timber framing and rustic furniture.