Hard Maple Drawer Side Stock
Sawn hard maple stock ripped to drawer side dimensions, S4S surfaced, >6mm thick. HTS 4407.93.0010 for planed maple lumber. Stable straight grain resists warping in furniture drawers.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If pre-glued panels
Glued laminated panels from maple strips move to heading 4412
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• S4S finish 4 sides; bundle by thickness; specify clear stock no defects
Related Products under HTS 4407.93.00.10
Hard Maple Lumber 1x6 Boards
Sawn hardwood lumber from hard maple (Acer saccharum) measuring 1 inch thick by 6 inches wide, planed and sanded for smooth finish, exceeding 6mm thickness. Classified under HTS 4407.93.0010 as sawn or chipped lengthwise, of hard maple species. Used primarily for high-end cabinetry and furniture making due to its durability and fine grain.
S2S Hard Maple Quarter Sawn Planks
Quarter-sawn hard maple planks surfaced on two sides (S2S), typically 4/4 thickness (about 25mm), sliced lengthwise for stability and ray fleck pattern. Falls under HTS 4407.93.0010 as peeled or sliced wood >6mm of hard maple. Ideal for musical instruments and architectural millwork.
Planed Hard Maple 8/4 Beams
Thickness planed hard maple beams at 8/4 (2 inches nominal, ~50mm actual), sawn lengthwise for structural applications. HTS 4407.93.0010 applies to this sanded, end-jointed possible maple wood exceeding 6mm. Commonly used in custom furniture legs and gunstocks.
FAS Grade Hard Maple Lumber
First and Seconds (FAS) grade hard maple sawn lumber, typically 6/4 to 8/4 thickness, planed or rough sawn exceeding 6mm. Classified HTS 4407.93.0010 for superior quality maple (Acer spp.) used in fine woodworking. Features minimal defects for premium applications.
Hard Maple End-Jointed Panels
End-jointed hard maple panels assembled from shorter lengths, planed and sanded, thickness over 6mm for dimensionally stable panels. HTS 4407.93.0010 covers this sawn/peeled maple wood. Suitable for tabletops and shelving.
Rift Sawn Hard Maple Boards
Rift sawn hard maple boards cut at angle for straight grain, 4/4 thickness (~25mm), surfaced one side. Under HTS 4407.93.0010 as sliced lengthwise maple exceeding 6mm. Preferred for flooring and cabinet doors.