Beech Sawn Lumber 1x6 Boards
Kiln-dried beech (Fagus spp.) lumber sawn lengthwise into 1-inch by 6-inch boards with thickness exceeding 6 mm, typically planed and sanded for smooth finish. Classified under HTS 4407.92.00.00 as sawn or chipped wood of beech, not further manufactured into specific products. Ideal for custom woodworking and furniture components.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If species identification uncertain or mixed with other hardwoods
Falls under 'other' coniferous or hardwood if not specifically documented as pure beech (Fagus spp.).
If shaped or profiled along edges for specific assembly
Becomes 'beaded, molded, etc.' cellular wood panels if profiled beyond simple planing.
If imported as veneer sheets despite thickness
Reclassified as beech veneer if sliced/peeled and presented primarily as thin sheets for lamination.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Require phytosanitary certificates confirming beech (Fagus spp.) origin and heat treatment per ISPM 15 to prevent pests
• Verify thickness exceeds 6 mm post-planing; measure actual dimensions to avoid reclassification as thin plywood
• Document kiln-drying process (MC <19%) to meet building code standards and prevent moisture-related customs holds
Related Products under HTS 4407.92.00.00
Planed Beech Timber Beams
Rough-sawn beech logs converted into planed structural beams exceeding 6 mm thick, sourced from Fagus sylvatica. Meets HTS 4407.92.00.00 criteria for sawn/planed beech wood used in construction framing. End-jointed for stability in load-bearing applications.
Sanded Beech Flooring Planks
Select-grade beech wood planks sawn lengthwise, sanded smooth, thickness 19 mm for tongue-and-groove flooring installation. HTS 4407.92.00.00 applies as unfinished sawn/planed beech exceeding 6 mm, prior to final factory finishing. Popular for European-style hardwood floors.
Beech End-Jointed Stair Treads
Fagus beech stair treads sawn to 36 mm thickness, end-jointed for seamless lengths exceeding 6 mm. Classified under 4407.92.00.00 as planed/sanded beech wood, not yet fully fabricated into joinery. Used in residential staircase construction.
Kiln-Dried Beech Panel Stock
Sliced beech panels 15 mm thick, kiln-dried to 8% MC, sanded for cabinetry blanks under HTS 4407.92.00.00. Represents sawn or peeled beech wood exceeding 6 mm thickness, ideal for flat-pack furniture components.
Beech Wood Drawer Sides Blanks
Planed beech blanks sawn to 12 mm x 100 mm x 400 mm for flat-pack drawer sides, HTS 4407.92.00.00 eligible as unfinished sawn beech. Sanded surfaces ready for CNC machining into furniture parts.
European Beech Joinery Lumber
Fagus sylvatica lumber sawn 25 mm thick, end-matched for door/window joinery under HTS 4407.92.00.00. Planed and sanded but remains classified as basic sawn wood stock.