White Oak Lumber 1x8x10
Sawn white oak (Quercus alba) boards measuring 1 inch thick by 8 inches wide by 10 feet long, planed and sanded for smooth finish. Thickness exceeds 6 mm, classified under 4407.91.00 as oak wood sawn lengthwise, not further manufactured into panels or furniture.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If from non-oak hardwood species like maple
Changes to 'other' coniferous or hardwood category when species is not specifically Quercus spp.
If sheets/planks ≤6mm thick
Thickness ≤6mm shifts classification from heading 4407 to 4408 for veneer or thin wood.
If densified or further compressed
Densified oak wood falls under Chapter 44 heading 4412 for specific treated woods.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Quercus spp. with botanical documentation; ensure moisture content labeling complies with USDA regulations; inspect for kiln-drying certificates to avoid pest quarantine issues
Related Products under HTS 4407.91.00
Red Oak Sawn Planks 2x12x12
Red oak (Quercus rubra) planks sawn lengthwise, 2 inches thick by 12 inches wide by 12 feet, end-jointed for stability. Meets 4407.91.00 criteria for oak wood over 6mm thick, ideal for flooring and cabinetry.
Live Oak Quarter-Sawn Boards
Quarter-sawn live oak (Quercus virginiana) boards, sliced lengthwise with thickness exceeding 6mm, sanded for woodworking. Specifically oak (Quercus spp.) under 4407.91.00, valued for shipbuilding and durability.
Bur Oak Planed Lumber 4/4x6x8
Planed bur oak (Quercus macrocarpa) lumber in 4/4 thickness (about 25mm), 6 inches wide by 8 feet, sawn or chipped lengthwise. Fits 4407.91.00 as processed oak wood exceeding 6mm for furniture making.
Post Oak Sliced Panels 1x4x16
Sliced post oak (Quercus stellata) panels, 1 inch thick by 4 inches wide by 16 feet long, suitable for paneling. Thickness over 6mm qualifies under HTS 4407.91.00 for oak soft-hardwood.
Swamp Chestnut Oak Boards
Sawn swamp chestnut oak (Quercus michauxii) boards, planed and sanded, thickness exceeding 6mm for boatbuilding. Precisely matches 4407.91.00 as Quercus spp. oak lumber.
Northern Red Oak S4S Lumber
Surfaced four sides (S4S) northern red oak (Quercus rubra) lumber, sawn lengthwise over 6mm thick for millwork. Standard oak product under 4407.91.00.