Sliced Mahogany Planks
Mahogany (Swietenia spp.) sliced or peeled into planks exceeding 6mm thick, sanded for cabinetry use. Falls under 4407.29.02 for tropical wood processed only by sawing/peeling without further assembly.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If veneer sheets ≤6mm thick
Sliced sheets ≤6mm become 'veneer sheets' under heading 4408.
If laminated into blockboard
Multiple layers glued into panels become engineered wood under 4412.94.
If from bamboo (woody material)
Chapter note includes bamboo under 'wood'; specific tropical bamboo subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• CITES Appendix II permit mandatory for Swietenia mahoganies; ensure chain-of-custody docs
• Measure and document actual thickness post-processing to confirm >6mm criterion
• Beware kiln-dried shipments; drying doesn't change classification but requires moisture content certs
Related Products under HTS 4407.29.02
Sawn Teak Lumber
Teak wood (Tectona grandis) sawn lengthwise into boards exceeding 6mm thickness, typically planed and sanded for furniture making. Classified under 4407.29.02 as sawn tropical hardwood lumber, not further manufactured into specific articles.
Planed Ipe Deck Boards
Ipe (Handroanthus spp.) tropical hardwood sawn lengthwise, planed and sanded to over 6mm thickness for outdoor decking. Meets 4407.29.02 as unfinished sawn tropical lumber without additional machining.
Sawn Meranti Lumber
Dark red meranti (Shorea spp.) sawn lengthwise to thickness over 6mm, planed for structural timber. Classified 4407.29.02 as other tropical sawn wood, suitable for construction framing.
Sanded Padouk Boards
Padouk (Pterocarpus spp.) tropical hardwood boards sawn or sliced over 6mm thick, sanded smooth for boatbuilding. 4407.29.02 applies to unfinished tropical sawn lumber.
Sawn Wenge Planks
Wenge (Millettia laurentii) sawn lengthwise into planks exceeding 6mm, lightly planed for high-end flooring stock. Tropical hardwood under 4407.29.02 as basic sawn product.
Peled Okoume Lumber
Okoume (Aucoumea klaineana) tropical plywood face veneer peeled to >6mm boards, sanded. 4407.29.02 for sliced/peeled tropical wood not reduced to ≤6mm sheets.