Planed Spanish Cedar Planks for Cigar Boxes
Planed Spanish cedar planks (Cedrela spp.) specifically cut for premium cigar box linings, sawn lengthwise with thickness over 6mm. HTS 4407.29.0260 applies due to its classification as Cedro tropical wood, valued for insect-repellent aroma. Dimensions typically 1/4 inch thick by 6-12 inches wide.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If further worked into finished cigar box components
Wood cut to shape or further fabricated for specific use becomes 'other articles of wood' in 4421.
If coniferous like pine instead
Coniferous sawn wood falls under 4407.11, differentiated by botanical family from tropical hardwoods.
If densified or compressed
Densified Spanish cedar wood changes density classification to heading 4413.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Label with exact species name 'Cedrela spp.' on commercial invoice; avoid mixing with other tropical woods in same shipment; check Lacey Act declarations for US imports
Related Products under HTS 4407.29.02.60
Spanish Cedar Sawn Lumber 1x6x8 ft
Sawn lengthwise Spanish cedar (Cedrela spp.) boards measuring 1 inch thick by 6 inches wide by 8 feet long, planed on all four sides for smooth finish. Classified under HTS 4407.29.0260 as sawn tropical wood exceeding 6mm thickness, specifically Cedro also known as Spanish Cedar. Ideal for fine woodworking and cigar box construction due to its aromatic properties.
Cedro Sliced Veneer Sheets 1/16 inch Thick
Thin sliced Spanish cedar veneer sheets from Cedrela spp., thickness exceeding 6mm in panel form but sliced lengthwise, used for high-end cabinetry facing. Falls under HTS 4407.29.0260 as sliced tropical wood of Cedro species. Prized for its straight grain and reddish-brown color in decorative applications.
Spanish Cedar End-Jointed Lumber Beams
End-jointed Spanish cedar (Cedrela spp.) beams sawn lengthwise, planed, thickness exceeding 6mm, used in boat building. Classified HTS 4407.29.0260 for Cedro tropical hardwood with finger-jointing. Provides extended lengths without defects.
Cedrela Sawn Quarter-Sawn Boards 4/4 Thickness
Quarter-sawn Spanish cedar boards (Cedrela spp.) nominal 4/4 thickness (1 inch), sawn lengthwise for musical instrument backs like guitars. HTS 4407.29.0260 for tropical Cedro wood exceeding 6mm. Features ray fleck pattern prized by luthiers.
Planed Cedro Guitar Neck Blanks
Planed Spanish cedar neck blanks from Cedrela spp., sawn and rough-shaped but retaining lumber form, thickness over 6mm. HTS 4407.29.0260 as Cedro tropical wood sawn lengthwise. Preferred for stable, resonant tonewoods.
Spanish Cedar Drawer Sides Lumber
Sawn and planed Spanish cedar (Cedrela spp.) lumber cut to standard drawer side dimensions, thickness exceeding 6mm. Classified under HTS 4407.29.0260 for Cedro tropical wood used in fine furniture. Naturally aromatic to deter insects.