Sawn Ipé Lumber 1x6x8 ft
Ipé wood (Tabebuia spp.) sawn lengthwise to dimensions of 1 inch thick by 6 inches wide by 8 feet long, exceeding 6mm thickness, planed on all four sides for smoothness. Classified under HTS 4407.29.0220 as sawn tropical Ipé wood not further manufactured. Used primarily for outdoor decking due to its exceptional durability and resistance to rot.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If in the form of logs rather than sawn
Unsawn or rough logs of Ipé fall under the coniferous/non-tropical wood sawn category? No - tropical logs are 4403; sawn specifically requires lengthwise sawing over 6mm.
If assembled into decking boards with end-joints or finger-jointed
Further worked or end-jointed lumber exceeding simple planing moves to Chapter 44 heading for builders' joinery.
If cut to specific lengths under 3m and shaped for picture frame molding
Ipé processed into moldings or profile shapes becomes other wood articles rather than basic sawn lumber.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain CITES permit as Ipé is Appendix II listed; verify species documentation from exporter; ensure fumigation certificate for wooden products to meet USDA APHIS requirements
Related Products under HTS 4407.29.02.20
Planed Ipé Decking Boards 5/4x6x12 ft
Thickness-planed Ipé (Handroanthus spp.) decking boards measuring 5/4 inch thick by 6 inches wide by 12 feet long, sanded for finish. Meets HTS 4407.29.0220 criteria for tropical Ipé sawn or sliced over 6mm thickness. Renowned for extreme hardness and weather resistance in exterior applications.
Sanded Ipé Siding Planks 1x8x10 ft
Ipé wood siding planks sawn to 1x8x10 ft dimensions, sanded on faces and edges for architectural siding use. Falls squarely under HTS 4407.29.0220 as other tropical Ipé lumber exceeding 6mm thickness, planed/sanded but not further manufactured. Prized for its golden-to-olive color and dimensional stability.
End-Jointed Ipé Lumber 2x4x16 ft
Ipé (Lapacho) finger-jointed lumber combining shorter lengths into 2x4x16 ft boards, planed and end-jointed but retaining sawn character over 6mm thick. Specifically classified HTS 4407.29.0220 permitting end-jointing for tropical Ipé. Ideal for long-span outdoor structural applications.
Sliced Ipé Panels 19mm x 24x96 inches
Ipé wood sliced lengthwise into large panels 19mm thick (exceeding 6mm), 24 inches wide by 96 inches long for wall cladding. HTS 4407.29.0220 covers sliced tropical Ipé not further manufactured beyond planing. Exceptional for high-end interior/exterior architectural panels.
Planed Ipé Timber 4x6x12 ft
Heavy structural Ipé timber sawn to 4x6x12 ft dimensions, planed on four sides for marine piling or heavy construction. Precisely HTS 4407.29.0220 as thick sawn tropical Ipé lumber. Brazilian walnut density makes it ideal for dock fenders and heavy outdoor beams.
Sawn Ipé Cladding 1x4x12 ft
Narrow Ipé cladding boards sawn 1 inch thick by 4 inches wide by 12 feet long, lightly sanded for vertical siding. HTS 4407.29.0220 classification for Ipé sawn lengthwise exceeding 6mm thickness. Patagonian walnut durability perfect for rain screen systems.