Sliced Teak Panel Stock
Teak sliced into large panels exceeding 6mm thickness, sanded for cabinetry blanks. HTS 4407.23.0100 applies to this tropical wood slicing method. Provides stable substrate for high-end millwork.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If blockboard with teak face veneers
Laminated blockboard panels classify under densified or glued heading 4412.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify slicing direction meets lengthwise requirement; bundle securely to prevent warp; declare as panel stock not finished panels to avoid 4418
Related Products under HTS 4407.23.01.00
Sawn Teak Lumber 1x6
Teak wood sawn lengthwise into 1-inch thick by 6-inch wide boards exceeding 6mm thickness, typically planed and sanded for smooth finish. Classified under HTS 4407.23.0100 as sawn tropical teak wood not further manufactured. Used primarily for outdoor decking and furniture framing.
Planed Teak Planks 2x4
Rough sawn teak converted to planed 2x4 dimensional lumber over 6mm thick, end-jointed for stability. Meets HTS 4407.23.0100 criteria for tropical teak sawn or chipped lengthwise with minimal processing. Ideal for boat building and exterior joinery.
Sanded Teak Deck Boards
Teak boards sawn to 1x4 dimensions, sanded for decking applications, thickness 25mm exceeding 6mm limit. Falls under HTS 4407.23.0100 as sliced/peeled tropical teak with surface sanding permitted. Highly durable for marine and patio environments.
End-Jointed Teak Studs
Teak studs sawn lengthwise, end-jointed, planed to 2x6 profile exceeding 6mm, for structural outdoor use. HTS 4407.23.0100 covers this tropical hardwood processing level. Preferred for pergola construction due to natural oils.
Teak Sawn Beams 4x8
Large teak beams sawn to 4x8 dimensions, lightly planed, over 6mm thick for heavy construction. Specifically classified HTS 4407.23.0100 as tropical teak lumber. Used in yacht building and tropical architecture.
Planed Teak Joists
Teak joists planed to uniform 2x10 size over 6mm, sawn lengthwise for flooring supports. Tropical teak under HTS 4407.23.0100 with permitted planing. Rot-resistant for coastal applications.