Sawn Virola Lumber 1x6
Virola wood sawn lengthwise into 1-inch by 6-inch boards, planed and sanded for smoothness, with thickness exceeding 6 mm. Classified under HTS 4407.22.0091 as 'other' sawn tropical wood from Virola species, distinguished from logs or thinner veneers. Commonly used in interior paneling and furniture due to its lightweight and workable nature.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sourced from non-tropical dark red meranti, light red meranti or meranti bakau
Changes from Virola-specific subheading to general tropical wood sawn lumber category.
If for coniferous species like pine or fir
Coniferous sawn wood falls under separate conifer heading regardless of thickness.
If further laminated into plywood panels
Plywood made from Virola veneers shifts to Chapter 44 heading for laminated wood products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Virola (Pourouma spp.) via botanical identification to confirm tropical wood classification
• Provide fumigation certificate and phytosanitary documentation to meet USDA APHIS import requirements for sawn wood
• Declare exact thickness (>6mm) and processing (sawn/planed) to avoid reclassification to Chapter 44 veneers or Chapter 45 plywood
Related Products under HTS 4407.22.00.91
Imbuia Sawn Boards 2x4
Imbuia (Phoebe porosa) tropical hardwood sawn lengthwise into 2x4 dimensional lumber, end-jointed for stability, thickness over 6 mm. Falls under HTS 4407.22.0091 as 'other' Virola, Imbuia, Balsa tropical sawn wood, not qualifying as thin veneer. Valued for its durability and attractive grain in cabinetry and flooring.
Balsa Sawn Planks 1x12
Balsa (Ochroma pyramidale) wood sawn into 1x12 wide planks, lightly sanded, thickness exceeding 6 mm for model-making and core materials. HTS 4407.22.0091 covers this 'other' tropical sawn wood, differentiated from unsawn logs by lengthwise sawing process. Extremely lightweight properties make it ideal for aerospace composites and hobby models.
Planed Virola S4S Lumber
Virola tropical wood surfaced four sides (S4S) sawn lumber, end-jointed, thickness 19mm for interior trim applications. HTS 4407.22.0091 includes planed tropical sawn wood exceeding 6mm thick from Virola, excluding thin sliced veneers. Provides smooth finish suitable for veneering substrates and moldings.
Imbuia Quarter-Sawn Boards
Quarter-sawn Imbuia lumber boards cut radially to minimize warping, sanded surface, 8/4 thickness for high-end furniture. Classified HTS 4407.22.0091 as other sawn tropical Imbuia wood >6mm thick, sawn lengthwise per chapter specifications. Quarter-sawn grain pattern enhances stability and aesthetic appeal.
Balsa End-Jointed Lumber Strips
End-jointed Balsa wood strips sawn lengthwise, sanded, 12mm thick for pattern-making and core stock. HTS 4407.22.0091 covers end-jointed tropical sawn Balsa exceeding 6mm, allowing length extension via finger joints. Lightweight construction ideal for tooling and prototyping applications.
Virola Sanded Dimension Lumber
Sanded Virola 2x6 dimension lumber sawn lengthwise for framing and sheathing, thickness 38mm. HTS 4407.22.0091 for other processed tropical Virola sawn wood >6mm, planed or sanded allowable per heading terms. Cost-effective alternative to hardwoods in non-structural applications.