Rough Redwood Fence Boards
Rough-sawn redwood pickets and rails, typically 1x6 or 1x8, for fencing. HTS 4407.19.0082 applies to this untreated, coniferous rough wood from Sequoia sempervirens exceeding 6mm.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If lodgepole pine species
Other specific conifers like lodgepole have distinct statistical categories.
If redwood sawdust compressed into pellets
Per subheading note, agglomerated sawdust/shavings become wood pellets under 4401.31.
If worked into clothes pegs or similar articles
Further worked wood articles shift to heading 4421.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Bundle securely to prevent warping; customs may reject damaged rough edges as processed
• Include sawmill origin docs tracing to verified Sequoia sempervirens stands
• Avoid any end-coating; preservatives disqualify 'untreated' status
Related Products under HTS 4407.19.00.82
Rough Redwood Lumber 2x4
Unplaned, unsanded redwood (Sequoia sempervirens) boards measuring 1.5 inches thick by 3.5 inches wide, sawn lengthwise with thickness exceeding 6 mm. Classified under HTS 4407.19.0082 as rough coniferous wood, specifically untreated redwood, not further processed beyond sawing.
Rough Redwood Siding Boards
Rough-sawn redwood planks, approximately 1 inch thick by 6-12 inches wide, used for exterior siding applications. Meets HTS 4407.19.0082 criteria as untreated, rough coniferous lumber from Sequoia sempervirens exceeding 6mm thickness.
Rough Redwood Timbers 4x6
Heavy rough-cut redwood timbers, 3.5x5.5 inches in cross-section, sawn lengthwise for structural use. Falls under 4407.19.0082 as untreated, rough redwood (Sequoia sempervirens) with thickness >6mm.
Rough Redwood Decking Planks
Unfinished redwood boards, 5/4 x 6 inch nominal size, rough sawn for decking. Classified in HTS 4407.19.0082 for its status as rough, untreated Sequoia sempervirens lumber over 6mm thick.
Rough Redwood Beam Stock
Large rough redwood beams, 6x8 to 8x12 sections, sawn for beam applications. Qualifies under 4407.19.0082 as rough, untreated coniferous redwood >6mm thick.
Rough Redwood Joist Material
Rough sawn redwood 2x10 boards for floor joists, thickness exceeding 6mm. HTS 4407.19.0082 for untreated Sequoia sempervirens rough coniferous lumber.