Port Orford Cedar Sliced Boards 1x6
Sliced lengthwise Port Orford cedar (Chamaecyparis lawsoniana) boards 3/4" x 5.5" x 10 ft, sanded surface, thickness over 6mm, untreated. Fits 4407.19.0077 as other Chamaecyparis spp. cedar, coniferous, sawn/peeled, for cabinetry and millwork.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If incense cedar (Calocedrus decurrens)
Specific subheading exists for incense cedar within 'other cedar'; requires precise identification.
If processed into compressed wood pellets
Wood by-products agglomerated into pellets fall under fuel wood heading 4401.
If further worked into finished articles like moldings
Advanced worked wood products beyond basic sawing move to heading 4421.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Include botanical species certification for Chamaecyparis to prevent misclassification as generic softwood
• Verify moisture content documentation; excessive drying may trigger treatment classification
• Avoid bundling with treated wood to prevent commingling penalties
Related Products under HTS 4407.19.00.77
Atlantic White Cedar Quarter-Sawn Boards
Quarter-sawn Atlantic white cedar (Chamaecyparis thyoides) boards 1" x 6" x 10 ft, peeled and sliced, sanded, untreated, thickness >6mm. 4407.19.0077 classification for Chamaecyparis spp. used in boat building and shingles.
Incense Cedar Sawn Lumber 1x8 S4S
Surfaced four sides (S4S) incense cedar (Libocedrus decurrens) 3/4" x 7-1/4" x 16 ft, sawn lengthwise, untreated, over 6mm thick. Under 4407.19.0077 as other Libocedrus spp. cedar for fencing and closet lining due to aromatic properties.
Western Red Cedar Sawn Lumber 2x4
Sawn lengthwise cedar lumber (Thuja plicata) measuring 1.5" x 3.5" x 8 ft, planed and sanded with thickness exceeding 6mm, untreated. Classified under 4407.19.0077 as 'other cedar' coniferous wood, sawn or chipped lengthwise, not treated, for construction and siding applications.
Alaska Yellow Cedar Planed Planks 2x6
Planed Alaska yellow cedar (Cupressus nootkatensis) planks 1.5" x 5.5" x 12 ft, end-jointed, thickness exceeding 6mm, untreated. Classified in 4407.19.0077 as Cupressus spp. coniferous cedar lumber for decking and exterior trim.
Western Juniper Sawn Timbers 4x4
Sawn western juniper (Juniperus occidentalis) timbers 3.5" x 3.5" x 8 ft, planed all around, untreated, exceeding 6mm thickness. Classified 4407.19.0077 as Juniperus spp. coniferous cedar for rustic furniture and posts.