Rough Western Red Cedar Lumber 2x4
Rough-sawn lumber from Western Red Cedar (Thuja plicata), measuring 2 inches by 4 inches in nominal size and exceeding 6mm thickness, chipped lengthwise without planing, sanding, or end-jointing. Classified under 4407.19.00.76 as rough, untreated coniferous cedar wood sourced from Thuja species, primarily used for construction framing and outdoor projects.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sourced from non-cedar coniferous species like pine
Non-cedar conifers fall under 'Other' coniferous wood, changing from cedar-specific subheading.
If planed, sanded, or finger-jointed
Surface processing beyond rough-sawing moves it to the planed category in the same coniferous chapter.
If in fuelwood form under 6mm chips
Fuelwood or chips typically under 6mm thickness classify as wood waste, not sawn lumber.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Thuja spp. via phytosanitary certificate to confirm cedar classification and avoid reclassification
• Ensure no chemical treatments applied, as treated cedar shifts to 4407.19.01 subheading; document milling process
• Measure actual thickness post-sawing to exceed 6mm; common pitfall is edge-planing disqualifying 'rough' status
Related Products under HTS 4407.19.00.76
Rough Alaska Yellow Cedar Boards 1x6
Rough-cut boards from Alaska Yellow Cedar (Chamaecyparis nootkatensis), 1 inch by 6 inches nominal, sawn lengthwise with thickness over 6mm, untreated and not end-jointed. Falls under HTS 4407.19.00.76 for rough, other cedar species in the Chamaecyparis genus, ideal for boat building and siding.
Rough Port Orford Cedar Planks 2x6
Lengthwise sawn, rough planks of Port Orford Cedar (Chamaecyparis lawsoniana), 2x6 nominal dimensions exceeding 6mm thick, no planing or sanding applied. Classified in 4407.19.00.76 as rough, untreated cedar from Chamaecyparis spp., valued for its durability in furniture and decking.
Rough Eastern Red Cedar Timbers 4x4
Rough-sawn 4x4 timbers from Eastern Red Cedar (Juniperus virginiana), chipped lengthwise, thickness exceeding 6mm, untreated. HTS 4407.19.00.76 covers rough other cedar from Juniperus spp., commonly used for fencing and closet linings due to natural insect resistance.
Rough Incense Cedar Siding Boards 1x8
Rough 1x8 siding boards sawn from Incense Cedar (Calocedrus decurrens, aka Libocedrus), over 6mm thick, lengthwise sliced without further processing. Fits 4407.19.00.76 as rough, untreated Libocedrus spp. cedar for exterior siding and pencil stock.
Rough Monterey Cypress Lumber 2x8
Rough-sawn 2x8 lumber from Monterey Cypress (Cupressus macrocarpa), exceeding 6mm thickness, untreated coniferous wood sliced lengthwise. Under 4407.19.00.76 for rough Cupressus spp. cedar, used in landscaping and greenhouse framing.