End-Jointed Yellow Cedar Studs
2x4 yellow cedar studs with finger-jointed ends for length extension, planed and sanded, untreated exceeding 6mm thickness. HTS 4407.19.0075 includes this end-jointed 'other' yellow cedar lumber. Used in premium framing where stability is key.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If laminated into engineered beams
Laminated structural lumber classifies under 4412.94, not sawn wood.
If incense cedar variety
Different cedar species like incense have separate statistical reporting.
If assembled into posts/beams
Assembled posts and beams are joinery under 4418.60 regardless of material.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Specify finger-joint strength meets structural codes in docs
• Differentiate from glued laminated timber (glulam) under 4418
• Test for binder content if questioned
Related Products under HTS 4407.19.00.75
Yellow Cedar Lumber 2x4 S4S
Sawn yellow cedar (Chamaecyparis nootkatensis) boards measuring 1.5 inches thick by 3.5 inches wide, planed, sanded, and end-jointed for uniformity. This untreated lumber exceeds 6mm thickness and falls under HTS 4407.19.0075 as 'other' yellow cedar not further treated. Commonly used in high-end siding and trim applications.
S4S Yellow Cedar 1x6 Boards
Planed and sanded 1-inch by 6-inch yellow cedar boards, sawn lengthwise exceeding 6mm thickness, untreated and not chemically preserved. Classified under HTS 4407.19.0075 for 'other' yellow cedar lumber used in exterior siding and paneling. Prized for natural decay resistance.
Yellow Cedar Sawn Planks 2x12
Thickness-exceeding 6mm yellow cedar planks sawn or chipped lengthwise, sanded but untreated, in 2x12 dimensions for structural beams. HTS 4407.19.0075 covers this 'other' yellow cedar category. Popular in coastal construction for weather resistance.
Planed Yellow Cedar Shiplap Siding
S4S planed yellow cedar shiplap boards over 6mm thick, untreated, sawn lengthwise for siding applications. Falls under HTS 4407.19.0075 as 'other' untreated yellow cedar lumber. Offers natural tongue-and-groove fit without further assembly.
Sanded Yellow Cedar Trim Boards 1x4
1x4 yellow cedar boards sanded smooth, sawn over 6mm thick, untreated for interior/exterior trim. Classified HTS 4407.19.0075 'other' yellow cedar not chemically treated. Fine grain ideal for staining or natural finish.
Yellow Cedar Sawn Decking 5/4x6
5/4-inch by 6-inch yellow cedar decking boards, planed one side, untreated sawn lumber >6mm thick. HTS 4407.19.0075 for 'other' yellow cedar used in marine environments. Naturally rot-resistant without preservatives.