Western Red Cedar Sawn Lumber 2x4
Sawn lumber measuring 2 inches by 4 inches thick, sourced from Western red cedar trees, sliced lengthwise with thickness exceeding 6mm, not chemically treated. Classified under HTS 4407.19.0069 as 'other' untreated Western red cedar sawn or chipped wood, planed or sanded for structural use. Ideal for construction framing due to its natural durability and resistance to decay.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sourced from spruce, pine, or fir (S-P-F)
Mixed S-P-F coniferous wood falls under specific subheading 4407.10 rather than Western red cedar category.
If heat treated or pressure treated
Treated Western red cedar shifts to 4407.19.01 subheading, excluding it from the untreated 'not treated' category.
If further processed into profiled or finger-jointed boards
Additional profiling, molding, or end-jointing moves it from sawn lumber in 4407 to continuously shaped wood in 4409.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain phytosanitary certificate confirming no pests or diseases, as required for coniferous lumber under ISPM 15
• Declare exact species as Western red cedar on entry documents to avoid reclassification to general coniferous codes
• Verify moisture content documentation if kiln-dried to prevent issues with 'not treated' status
Related Products under HTS 4407.19.00.69
Western Red Cedar Exterior Siding Boards
Planed and sanded siding boards from Western red cedar, thickness over 6mm, sawn lengthwise for use in home exteriors. Falls under HTS 4407.19.0069 as untreated 'other' Western red cedar sawn wood. Provides natural weather resistance without chemical preservatives.
Western Red Cedar Deck Railing Lumber
Sawn and end-jointed railing components from Western red cedar, exceeding 6mm thickness, untreated for outdoor deck applications. HTS 4407.19.0069 covers this as 'other' not treated Western red cedar sawn wood. Valued for its straight grain and aromatic properties.
Western Red Cedar Timber Beams 4x6
Rough-sawn timber beams 4x6 inches from Western red cedar, sliced lengthwise with thickness >6mm, untreated. Under HTS 4407.19.0069 for 'other' untreated Western red cedar sawn wood. Commonly used for exposed structural beams in rustic architecture.
Western Red Cedar Planed Fence Boards
Planed fence boards sawn from Western red cedar logs, thickness exceeding 6mm, end-jointed but untreated. HTS 4407.19.0069 applies to these 'other' not treated Western red cedar products. Popular for privacy fencing due to natural insect resistance.
Western Red Cedar Sawn Shingle Blanks
Sawn blanks for roof shingles from Western red cedar, >6mm thick, sliced and sanded but untreated. Classified in HTS 4407.19.0069 as 'other' Western red cedar sawn wood. Prepares material for traditional shake roofing.
Western Red Cedar Greenhouse Framing Lumber
Sawn framing lumber from Western red cedar for greenhouse structures, planed, >6mm thick, untreated. HTS 4407.19.0069 for 'other' not treated Western red cedar. Chosen for rot resistance in humid environments.