Rough Western Red Cedar Lumber 2x4
Unplaned Western red cedar boards measuring 2 inches by 4 inches by various lengths, sawn lengthwise with thickness exceeding 6 mm. Classified under HTS 4407.19.00.68 as rough, untreated coniferous wood specifically Western red cedar, not further processed beyond sawing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sourced from non-Western red cedar coniferous species
Other coniferous sawn wood falls under the broader 'other' coniferous category excluding specific Western red cedar subheading.
If planed, sanded, or finger-jointed
Any planing, sanding, or end-jointing moves it from rough primary wood to Chapter 44 heading 4409 for processed coniferous wood.
If assembled into structural framing studs
Assembled wooden frames or trusses exceed simple sawn lumber classification per Chapter 44 notes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Western red cedar via phytosanitary certificate; ensure no chemical treatments to qualify as 'not treated'
• Document moisture content under 19% for ISPM 15 compliance if applicable
• Beware of edge-trimming which may reclassify as planed
Related Products under HTS 4407.19.00.68
Rough Western Red Cedar 1x6 Boards
Sawn lengthwise Western red cedar boards 1 inch thick by 6 inches wide, rough surfaced without planing, thickness over 6 mm. Fits HTS 4407.19.00.68 as untreated, rough Western red cedar coniferous lumber from Thuja plicata.
Rough Western Red Cedar Timbers 4x6
Heavy rough-sawn Western red cedar timbers 4x6 inches for structural applications, sawn lengthwise exceeding 6 mm thickness, untreated. HTS 4407.19.00.68 covers this rough coniferous wood of Western red cedar species.
Rough Western Red Cedar Siding Boards
Rough textured Western red cedar boards pre-cut for exterior siding, sawn >6 mm thick, no planing or treatment. Precisely classified in HTS 4407.19.00.68 for rough, untreated Western red cedar sawn lengthwise.
Rough Western Red Cedar Decking Planks
Sawn rough Western red cedar planks for decking, thickness exceeding 6 mm, untreated and unplaned surfaces. Meets exact criteria of HTS 4407.19.00.68 as other rough Western red cedar coniferous wood.
Rough Western Red Cedar Beam Stock 6x8
Large rough-sawn Western red cedar beams 6x8 cross-section for construction, lengthwise sawn exceeding 6 mm, not treated. HTS 4407.19.00.68 designation for rough Western red cedar category.
Rough Western Red Cedar Fence Boards
Rough sawn Western red cedar boards for fencing applications, >6 mm thick, untreated coniferous wood sliced lengthwise. Classified HTS 4407.19.00.68 as rough, not treated Western red cedar.