Siberian Larch Edge-Glued Panels
Edge-glued panels from Siberian Larch, sawn lengthwise then glued edge-to-edge, untreated, >6mm thick. Still classifies under 4407.19.0067 as end-jointed sawn larch, not fully assembled. Used for tabletops and cabinetry blanks.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If face/back veneers applied
Veneered panels become 'plywood' under 4412 regardless of larch species.
If assembled into flooring with locks
Engineered multilayer flooring from larch classifies under 4418.71.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Glue must be wood-to-wood only; no facing laminates to stay in 4407
• Document glue type/percentage to confirm not 'plywood' under 4412
• Panel flatness tolerance critical for >6mm thickness verification
Related Products under HTS 4407.19.00.67
Siberian Larch Lumber 1x8
Siberian Larch (Larix sibirica) sawn lengthwise into 1-inch by 8-inch boards, planed and sanded but untreated with preservatives. Thickness exceeds 6mm, classified under 4407.19.0067 as 'other' larch wood sawn or chipped lengthwise, not chemically treated. Commonly used for exterior siding and decking due to natural durability.
Dahurian Larch Planks 2x10
Dahurian Larch (Larix gmelinii) planks sawn to 2x10 dimensions, end-jointed for stability, untreated. Meets 4407.19.0067 criteria as sawn coniferous larch >6mm thick, sliced lengthwise without chemical treatment. Ideal for structural beams in construction.
Planed Larch Siding Boards
Siberian Larch boards planed smooth for siding applications, sawn lengthwise, thickness 19mm, untreated. Classified in 4407.19.0067 as 'other' untreated larch exceeding 6mm. Natural rot resistance makes it popular for log cabin exteriors.
Larch Timber Beams 4x6
Rough-sawn Larch (Larix laricina) beams 4x6 inches for timber framing, untreated, thickness >6mm. Falls under 4407.19.0067 as other coniferous larch sawn lengthwise. Used in heavy construction where decay resistance is needed.
Sanded Larch Deck Boards
Siberian Larch decking boards sanded for smooth finish, sawn to 5/4x6 profile, untreated. Classified 4407.19.0067 for other untreated larch sawn >6mm. Excellent for outdoor decking due to tight grain and weather resistance.
Larch Studs 2x4
American Larch (Larix laricina) 2x4 studs sawn lengthwise, planed, untreated for framing. HTS 4407.19.0067 applies to this 'other' larch dimension lumber >6mm thick. Provides natural strength for residential construction.