Douglas Fir Rustic Sawn Planks 2x10
Rustic grade 2x10 Douglas fir planks with live-sawn texture, lightly planed faces, untreated. HTS 4407.19.0057 for sawn coniferous Douglas-fir exceeding 6mm thickness. Popular for barn doors, tabletops and exposed beam applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If No.2 or lower commercial grade
Lower grade Douglas-fir has separate statistical breakout.
If densified by compression without binders
Compressed densified wood classifies under heading 4413.
If finished with oil or stain at manufacture
Surface-worked beyond sanding becomes 'other wood articles'.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Photograph knots and checks pre-shipment for condition disputes
• Specify cathedral grain pattern requirements in purchase specs
• Allow 1/8-inch oversize for planer shrinkage during acclimation
Related Products under HTS 4407.19.00.57
Douglas Fir Lumber 2x4 S4S
S4S (surfaced four sides) Douglas fir lumber measuring 2 inches by 4 inches by various lengths, planed and sanded for smooth finish. Classified under HTS 4407.19.0057 as sawn coniferous wood of Douglas-fir, thickness exceeding 6mm, not chemically treated. Used primarily for framing in residential construction.
Douglas Fir Sawn Boards 1x8 Select Grade
Select grade 1-inch by 8-inch wide Douglas fir boards, sawn lengthwise, planed and end-jointed for stability. Meets HTS 4407.19.0057 criteria as untreated coniferous sawn wood exceeding 6mm thickness from Douglas-fir species. Ideal for siding, paneling and decorative trim applications.
Planed Douglas Fir Timbers 4x6
Heavy-duty 4x6 Douglas fir timbers, sawn, planed and sanded, untreated, thickness well exceeding 6mm. Falls under HTS 4407.19.0057 as 'other' Douglas-fir sawn coniferous wood not chemically treated. Commonly used for structural beams, posts and heavy framing.
Douglas Fir Sliced Veneer Backing Sheets
Sliced Douglas fir sheets exceeding 6mm thickness, lightly sanded, used as backing for decorative panels. Classified HTS 4407.19.0057 as sliced coniferous wood of Douglas-fir, untreated. Provides stable substrate for high-end furniture and cabinetry veneering.
Sanded Douglas Fir Decking Boards 5/4x6
5/4-inch by 6-inch Douglas fir decking boards, sawn lengthwise, sanded both faces, untreated. HTS 4407.19.0057 covers this sawn, sanded coniferous Douglas-fir lumber exceeding 6mm thickness. Designed for exterior decking and porch flooring applications.
End-Jointed Douglas Fir Studs 2x4x8
8-foot 2x4 Douglas fir wall studs with finger-jointed ends for length consistency, sanded surfaces. Classifies under HTS 4407.19.0057 as end-jointed sawn Douglas-fir exceeding 6mm, untreated. Standard framing material for light commercial construction.