Douglas-Fir 5x6 Rough Sawn Studs
Rough sawn 5-inch by 6-inch Douglas-fir studs (12.7 cm x 15.2 cm maxing the min dimension range), untreated coniferous lumber for wall framing. Thickness exceeds 6 mm, sawn lengthwise, fits HTS 4407.19.0055 precisely.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If non-coniferous like bamboo
Chapter note includes bamboo as 'wood' but in separate non-coniferous subheadings.
If tongue-and-grooved
Profiled wooden mouldings or beading go to worked wood heading 4421.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Grade stamp verification for structural use claims; ensure end-joints absent for correct classification; prepare for ISPM-15 if palletized
Related Products under HTS 4407.19.00.55
Rough Douglas-Fir Lumber 4x6
Rough-sawn Douglas-fir lumber measuring 4 inches thick by 6 inches wide (approximately 10.2 cm x 15.2 cm), with minimum dimension of 10.2 cm, sourced from Pseudotsuga menziesii. This coniferous wood is sawn lengthwise, exceeding 6 mm thickness, not planed beyond rough sawn state, and untreated, fitting HTS 4407.19.0055 due to its specific dimension range of 5.1-12.7 cm minimum.
Douglas-Fir 6x6 Timbers Rough Sawn
Rough-sawn Douglas-fir timbers at 6x6 inches (15.2 cm square), minimum dimension 15.2 cm but classified by smallest face in 10.2-12.7 cm eligible range for specific boards. Untreated coniferous sawn wood exceeding 6 mm thick, used for structural framing, precisely matches 4407.19.0055 for rough Douglas-fir sizing.
Rough 2x8 Douglas Fir Boards
Nominal 2-inch thick by 8-inch wide rough sawn Douglas-fir boards (5.1 cm x 20.3 cm), with thickness as minimum dimension of 5.1 cm fitting the subheading range. This lengthwise sawn, untreated coniferous lumber is ideal for decking and siding, classified under HTS 4407.19.0055.
Douglas-Fir 4x8 Rough Framing Lumber
Rough sawn 4x8 Douglas-fir lumber (10.2 cm x 20.3 cm) for construction framing, minimum dimension 10.2 cm within 5.1-12.7 cm spec. Sliced lengthwise from coniferous logs, exceeding 6 mm thick, untreated, directly aligns with HTS 4407.19.0055 statistical reporting.
Rough Sawn Douglas Fir 3x10 Planks
3x10 inch rough sawn Douglas-fir planks (7.6 cm x 25.4 cm), 7.6 cm minimum dimension qualifying for this subheading. Untreated, lengthwise chipped coniferous wood over 6 mm thick, suited for heavy joists, per HTS 4407.19.0055.
Rough 4x10 Douglas Fir Beams
4x10 inch rough sawn Douglas-fir beams (10.2 cm x 25.4 cm) with 10.2 cm min dimension, used in residential construction. Sliced or peeled lengthwise, untreated, >6 mm thick, classified HTS 4407.19.0055.