Stained Spruce Siding Boards
Planed spruce boards, 1x8 inches, treated with penetrating stain for outdoor siding applications. Falls under HTS 4407.19.00.02 as coniferous sawn wood over 6mm thick, preserved with stain.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If treated with non-preservative finishes
Non-preservative surface coatings like varnish may classify under general 'other' without paint/stain/creosote note.
If plywood rather than solid sawn
Layered plywood from coniferous sheets moves to plywood heading regardless of treatment.
If S-P-F species mix untreated
Mixed spruce-pine-fir without preservative falls under specific S-P-F subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide stain safety data sheets; ensure kiln-drying certification; check for ISPM 15 compliance if palletized
Related Products under HTS 4407.19.00.02
Painted Pine Lumber 2x4
Sawn pine lumber measuring 2 inches by 4 inches by 8 feet, planed and treated with exterior paint for weather resistance. Classified under HTS 4407.19.00.02 because it is coniferous wood sawn lengthwise, thickness over 6mm, treated with paint as a preservative.
Creosote Treated Fir Fence Posts
Sawn Douglas fir posts, 4x4x8 feet, pressure-treated with creosote for ground contact durability. HTS 4407.19.00.02 applies to this coniferous sawn lumber preserved with creosote.
Pressure Treated Pine Deck Boards
Sanded 5/4x6 pine decking boards treated with copper-based preservative under paint sealcoat. Coniferous sawn wood exceeding 6mm, treated with paint and other preservatives per HTS 4407.19.00.02.
Stain Treated Cedar Dimensional Lumber
2x6 cedar studs, end-jointed and stained with UV-protectant finish for framing. Though cedar is coniferous, classified under 4407.19.00.02 for paint/stain preserved sawn lumber over 6mm.
Painted Hemlock Sawn Timbers
6x8 hemlock timbers, planed surfaces painted with preservative primer for structural beams. HTS 4407.19.00.02 covers these thick coniferous sawn woods treated with paint.
Creosote Douglas Fir Railway Ties
8x10x8' Douglas fir crossties pressure-treated with creosote for railroad use. Sawn coniferous wood over 6mm preserved with creosote per HTS 4407.19.00.02.