Hem-Fir Scaffold Plank 2x10
Select structural Hem-fir planks 1-1/2" x 9-1/4" x 12 ft graded for scaffolding use. Classified under 4407.14.00.00 as sawn thickness >6mm coniferous lumber from mixed hemlock-fir.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If assembled into scaffold platforms
Assembled scaffold components from Hem-fir classified in heading 4418
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include scaffold grade certification per ANSI/SSFI standards
• Mark with safe working load capacity
• Inspect for knots and checks before acceptance
Related Products under HTS 4407.14.00.00
Hem-Fir S4S Lumber 2x4
Kiln-dried Hem-fir lumber that is surfaced on four sides (S4S), measuring 1.5 inches thick by 3.5 inches wide by 8 feet long, exceeding 6mm thickness. Classified under HTS 4407.14.00.00 as sawn coniferous wood from mixed Western hemlock and fir stands where species proportion varies. Ideal for residential framing and structural applications.
Western Hem-Fir 2x6 Framing Lumber
Sawn Hem-fir boards measuring 1-9/16" x 5-1/2" x 10 ft, planed and end-trimmed for construction framing. Falls under 4407.14.00.00 as thickness exceeds 6mm and originates from mixed hemlock-fir stands. Commonly used in joists and rafters.
Hemlock-Fir Kiln Dried 1x6 Boards
Planed and sanded Hem-fir boards 3/4" x 5-1/4" x 12 ft for paneling and shelving. Meets 4407.14.00.00 criteria as coniferous sawn wood over 6mm from mixed hemlock-fir sources. KD19 moisture content certified.
No.2 Grade Hem-Fir Studs 2x4x92-5/8
Grade No.2 Hem-fir pre-cut studs 1.5" x 3.5" x 92-5/8" for wall framing, sawn lengthwise exceeding 6mm thickness. Classified 4407.14.00.00 as Hem-fir coniferous lumber not further manufactured. Meets building code specifications.
Select Structural Hem-Fir 4x4 Posts
Premium Select Structural grade Hem-fir posts 3-1/2" x 3-1/2" x 8 ft, planed all around for decking and fencing. HTS 4407.14.00.00 as sawn/planed coniferous wood >6mm from mixed hemlock-fir. High strength for load-bearing.
Hem-Fir Beam 6x10 Rough Sawn
Rough sawn Hem-fir timber 5-1/2" x 9-1/2" x 16 ft for exposed ceiling beams. Thickness exceeds 6mm; classified under 4407.14.00.00 as coniferous sawn/chipped lengthwise from Hem-fir mixed stands.