S-P-F Beam 4x10 Timber
Sawn S-P-F structural beam 4x10 cross-section, end-jointed and sanded for load-bearing applications in construction. Originates from mixed spruce-pine-fir stands; thickness well over 6 mm. Classified in 4407.13.00.00 as S-P-F coniferous sawn wood.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sourced from hemlock-fir mixed stands
Hem-fir mixes have separate subheading from S-P-F spruce-pine-fir.
If assembled into built-up beams
Multi-ply assembled beams are joinery products, not sawn lumber.
If veneer sheets peeled from S-P-F logs
Peeled sheets under 6 mm thick become veneer sheets.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Ensure structural grading (No.1/No.2) stamps visible; comply with US lumber import quotas if applicable; test for treatment chemicals per EPA rules
Related Products under HTS 4407.13.00.00
S-P-F Construction Lumber 2x4
Kiln-dried S-P-F lumber measuring 2 inches by 4 inches by 8 feet, sourced from mixed spruce, pine, and fir stands where species proportion varies. Sawn lengthwise with thickness exceeding 6 mm, typically planed and end-jointed for structural framing. Classified under 4407.13.00.00 due to S-P-F coniferous origin and sawn/planed processing.
S-P-F Kiln-Dried 2x6 Boards
Planed and sanded S-P-F boards in 2x6 dimension, ideal for joists and rafters from mixed spruce-pine-fir forests. Thickness exceeds 6 mm after lengthwise sawing; end-jointed for stability. Fits 4407.13.00.00 as coniferous S-P-F sawn wood.
S-P-F Studs 2x4 x 92-5/8 Inch
Pre-cut S-P-F wall studs at 92-5/8 inches for residential framing, sawn lengthwise, planed, and kiln-dried. From mixed S-P-F stands with unknown species proportions, thickness >6 mm. Precisely matches 4407.13.00.00 for S-P-F sawn coniferous wood.
S-P-F Decking Boards 5/4x6
Planed S-P-F decking boards in 5/4x6 size, sawn lengthwise for outdoor patio use, kiln-dried with eased edges. From indeterminate spruce-pine-fir proportions meeting S-P-F definition. Falls under 4407.13.00.00 for processed coniferous S-P-F lumber.
S-P-F Furring Strips 1x3
Kiln-dried S-P-F furring strips 1x3 cross-section for wall and ceiling leveling, sawn and planed with thickness >6 mm. Sourced from mixed S-P-F stands per subheading definition. Correctly classified under 4407.13.00.00.
S-P-F Sheathing Plywood Base Lumber
Rough-sawn S-P-F lumber sheets prepped as base for sheathing, thickness exceeding 6 mm, lengthwise chipped and planed. Mixed spruce-pine-fir origin qualifies for 4407.13.00.00 coniferous sawn wood category.