Planed Fir Beam 4x6
Sawn fir (Abies spp.) timber cut to 4x6 inch (89mm x 140mm) beam size, planed on all four sides with end-jointed for stability, thickness well over 6mm. Falls under 4407.12.00 as processed coniferous sawn wood of fir species. Ideal for structural beams in heavy construction.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If from mixed hemlock-fir stands
Hem-fir mixed species from Western hemlock/fir stands classified separately under 4407.14.
If laminated into LVL beams
Laminated veneer lumber from fir veneers classified as densified or laminated wood in 4412.
If processed into wood pellets
Fir sawdust/shavings agglomerated into qualifying pellets move to fuel wood pellets under 4401.31.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Require grading stamps from recognized agencies like WWPA; verify moisture content under 19% for framing grades; declare exact species to prevent blending with hemlock-fir under different codes
Related Products under HTS 4407.12.00
Sawn Spruce Lumber 2x4
Kiln-dried spruce (Picea spp.) lumber sawn lengthwise to standard 2x4 dimensions (38mm x 89mm), planed and sanded for smooth finish, thickness exceeding 6mm. Classified under HTS 4407.12.00 as sawn coniferous wood specifically of spruce species. Used primarily for residential framing and construction.
Sanded Spruce Planks 1x8
Lengthwise sawn spruce boards measuring 1x8 inches (19mm x 184mm), sanded for finish carpentry, thickness exceeding 6mm, not further profiled. HTS 4407.12.00 applies to this pure spruce sawn coniferous wood. Commonly used for flooring, siding, and paneling.
Kiln-Dried Fir Studs 2x6
Fir (Abies spp.) sawn studs in 2x6 size (38mm x 140mm), kiln-dried to 12% moisture, planed and end-jointed, thickness >6mm. Classified 4407.12.00 as processed spruce/fir coniferous lumber. Standard for wall framing in construction.
End-Jointed Spruce Boards
Finger-jointed spruce (Picea spp.) boards sawn lengthwise, planed/sanded, thickness 20mm exceeding 6mm limit. HTS 4407.12.00 covers end-jointed coniferous spruce/fir sawn wood. Used for trim, shelving, and furniture components.
Planed Abies Fir Lumber 2x10
Sawn Abies fir lumber in 2x10 joist size (38mm x 235mm), four-sided planed, sanded finish, >6mm thick. Precisely HTS 4407.12.00 for fir sawn coniferous wood. Essential for floor joists and rafters.
S-P-F Borderline Spruce Framing
Sawn spruce-dominant framing lumber 2x4, planed, visually graded #2, thickness 38mm. While S-P-F common, pure Picea identification qualifies for 4407.12.00 over mixed 4407.13. Used in light framing.