Rough California Red Fir Studs 2x4x92
California red fir (Abies magnifica) rough studs, 2x4 inches by 92-5/8 inches for pre-cut framing. Thickness exceeds 6 mm, untreated, under HTS 4407.12.00.58 rough fir category.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If other coniferous species like larch
Non-fir/spruce conifers have separate 'other' coniferous subheadings.
If reconstituted from sawmill waste
Fiberboard or particleboard from wood by-products under heading 4418.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm pre-cut lengths don't constitute 'end-jointed' processing
• Include Western Wood Products Association grading reports
• Separate shipments of mixed conifers to avoid average classification
Related Products under HTS 4407.12.00.58
Rough Fir Lumber 2x4
Unplaned fir (Abies spp.) lumber measuring 2 inches by 4 inches by 8 feet, sawn lengthwise with a thickness exceeding 6 mm. Classified under HTS 4407.12.00.58 as rough coniferous wood of fir species, not treated, intended for construction framing.
Rough Abies Grandis Lumber 1x6
Rough sawn Grand fir (Abies grandis) boards, 1 inch thick by 6 inches wide by 10 feet long, exceeding 6 mm thickness. Meets HTS 4407.12.00.58 criteria for untreated rough fir wood from mechanical sawing.
Rough Noble Fir Timbers 4x4
Rough cut Noble fir (Abies procera) timbers, 4x4 inches cross-section by 12 feet, sawn lengthwise exceeding 6 mm thick. Fits HTS 4407.12.00.58 as untreated rough fir coniferous lumber.
Rough White Fir Framing Lumber 2x6
White fir (Abies concolor) rough sawn lumber for framing, 2x6 by 16 feet, thickness >6 mm, not planed or treated. Directly classified in HTS 4407.12.00.58 for rough fir wood.
Rough Subalpine Fir Boards 1x8
Rough sawn Subalpine fir (Abies lasiocarpa) boards, 1 inch by 8 inches by 12 feet, exceeding 6 mm thickness. Qualifies under HTS 4407.12.00.58 as rough, untreated fir coniferous wood.
Rough Balsam Fir Planks 2x10
Balsam fir (Abies balsamea) rough planks 2 inches by 10 inches by 14 feet for structural use. Sawn lengthwise >6 mm thick, not planed, fits HTS 4407.12.00.58 exactly.