Rough Spruce Lumber 2x4
Rough sawn spruce lumber measuring 2 inches by 4 inches, sourced from Picea spp., with thickness exceeding 6mm and no planing, sanding, or end-jointing. Classified under HTS 4407.12.0019 as rough coniferous wood of spruce, other than treated, for construction framing. Meets chapter note including woody materials like spruce in sawn lengthwise form.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If primarily fir (Abies spp.)
Fir wood falls under separate subheading 4407.11 within same coniferous category.
If planed or sanded
Planed, sanded, or finger-jointed wood shifts to processed category 4407.29.
If in chip or particle form
Wood chips from spruce classify under Chapter 44 heading for wood in chips.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Picea spp. spruce via phytosanitary certificate; ensure no chemical treatments to avoid reclassification; measure thickness post-moisture to confirm >6mm
Related Products under HTS 4407.12.00.19
Rough Sawn Spruce Planks 1x8
Unplaned spruce planks 1 inch thick by 8 inches wide, rough cut lengthwise from Picea spruce logs exceeding 6mm thickness. Fits HTS 4407.12.0019 for rough, untreated spruce sawn wood used in fencing or sheathing. Excludes end-jointing per heading specifications.
Rough Spruce Timbers 4x6
Heavy rough sawn spruce timbers 4x6 inches from Abies/Picea spp., sliced lengthwise over 6mm thick, untreated and unjointed. HTS 4407.12.0019 covers this 'other spruce' rough wood for structural beams in construction. Bamboo-like woody conifers included per chapter note.
Rough Picea Lumber for Pallets
Rough cut Picea spruce boards exceeding 6mm, sawn lengthwise without planing for pallet stock. Classifies in HTS 4407.12.0019 as untreated rough spruce, other than treated categories. Used in wood processing industries.
Rough Spruce Framing Studs 2x6
2x6 rough sawn studs from spruce (Picea spp.) trees, thickness >6mm, no sanding or jointing, for residential framing. HTS 4407.12.0019 for rough other spruce coniferous wood. Distinguishes from S-P-F mixes.
Unplaned Spruce Boards 1x12
Wide 1x12 rough spruce boards from Picea, sawn >6mm thick, untreated for siding or subflooring. Under HTS 4407.12.0019 as rough spruce other. Chapter note covers coniferous sawn wood.
Rough Sawn Norway Spruce Lumber
Norway spruce (Picea abies) rough lumber sawn lengthwise, >6mm, no end-jointing or sanding. HTS 4407.12.0019 for other rough spruce coniferous, untreated. Common for European imports.