Sitka Spruce Lumber 2x4
Sawn Sitka spruce (Picea sitchensis) lumber measuring 2 inches by 4 inches thick, planed and end-jointed for structural use, exceeding 6mm thickness. Classified under HTS 4407.12.00.18 as 'other' sawn coniferous wood of Sitka spruce, not chemically treated. Used primarily in construction framing due to its strength and lightweight properties.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sourced from mixed spruce-pine-fir stands
S-P-F classification applies to mixed coniferous stands where species proportions vary and are unknown.
If further machined into dimensional lumber
Wood worked beyond planing/sanding (e.g., profiled or tongued/grooved) moves to Chapter 44 heading 4409.
If processed into compressed pellets
Agglomerated by-products like sawdust from Sitka spruce become wood pellets under specific size criteria.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Sitka spruce (Picea sitchensis) via botanical documentation to avoid reclassification
• Provide mill certificates confirming no chemical treatment and thickness >6mm; end-jointing is permitted
Related Products under HTS 4407.12.00.18
Sanded Sitka Spruce Beam 4x6
Large Sitka spruce beams sawn lengthwise, end-jointed, sanded for finish, 4x6 inch cross-section exceeding 6mm thickness. HTS 4407.12.00.18 covers this untreated 'other' category of Sitka spruce coniferous sawn wood. Commonly used in timber framing and heavy construction.
Sliced Sitka Spruce Guitar Billet
Quarter-sawn Sitka spruce billets sliced lengthwise for guitar soundboards, planed and sanded, over 6mm thick, untreated. HTS 4407.12.00.18 for 'other' sawn Sitka spruce wood. Valued in luthiery for its tonal clarity and stability.
Sawn Sitka Spruce Cant 6x8
Heavy Sitka spruce cants sawn lengthwise for further processing, sanded surfaces, thickness well exceeding 6mm, untreated. HTS 4407.12.00.18 'other' category for Sitka spruce sawn wood. Used in millwork and heavy timber construction.
Quarter-Sawn Sitka Spruce Timber
Quarter-sawn Sitka spruce timber for high-end flooring and paneling, planed and sanded, >6mm thick, no treatment. Classifies under HTS 4407.12.00.18 as other untreated sawn Sitka spruce coniferous wood. Prized for stability and attractive ray fleck pattern.
Sanded Sitka Spruce Panel Stock
Large sanded Sitka spruce panels sawn lengthwise, suitable for cabinetry, >6mm thick, untreated. Under HTS 4407.12.00.18 as other sawn Sitka spruce. Offers clean, workable surface for joinery.
Planed Sitka Spruce Rafters 2x10
Sitka spruce rafters sawn and planed for roof framing, 2x10 size exceeding 6mm, end-jointed, untreated. HTS 4407.12.00.18 'other' Sitka spruce sawn wood. Lightweight yet strong for roofing applications.