Planed Sitka Spruce Planks 1x12
Wide Sitka spruce planks sawn lengthwise, sliced, planed smooth, and sanded, 1 inch thick by 12 inches wide, exceeding 6mm. Falls under HTS 4407.12.00.18 for untreated 'other' Sitka spruce sawn wood. Ideal for boatbuilding and musical instrument backs.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hem-fir mixed origin
Hem-fir applies to mixed Western hemlock and fir stands with unknown proportions.
If assembled into cellular wooden panels
Further manufacture into reconstructed wood blocks or sheets changes classification.
If in the rough, not sawn to size
Unplaned, unsanded wood in log or rough form falls under heading 4403 for coniferous wood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include fumigation certificates if required for wooden packaging; product itself must confirm no treatment
• Measure moisture content (<19%) to comply with ISPM 15 if applicable, though not chemically treated
Related Products under HTS 4407.12.00.18
Sanded Sitka Spruce Beam 4x6
Large Sitka spruce beams sawn lengthwise, end-jointed, sanded for finish, 4x6 inch cross-section exceeding 6mm thickness. HTS 4407.12.00.18 covers this untreated 'other' category of Sitka spruce coniferous sawn wood. Commonly used in timber framing and heavy construction.
Sliced Sitka Spruce Guitar Billet
Quarter-sawn Sitka spruce billets sliced lengthwise for guitar soundboards, planed and sanded, over 6mm thick, untreated. HTS 4407.12.00.18 for 'other' sawn Sitka spruce wood. Valued in luthiery for its tonal clarity and stability.
Sawn Sitka Spruce Cant 6x8
Heavy Sitka spruce cants sawn lengthwise for further processing, sanded surfaces, thickness well exceeding 6mm, untreated. HTS 4407.12.00.18 'other' category for Sitka spruce sawn wood. Used in millwork and heavy timber construction.
Quarter-Sawn Sitka Spruce Timber
Quarter-sawn Sitka spruce timber for high-end flooring and paneling, planed and sanded, >6mm thick, no treatment. Classifies under HTS 4407.12.00.18 as other untreated sawn Sitka spruce coniferous wood. Prized for stability and attractive ray fleck pattern.
Sanded Sitka Spruce Panel Stock
Large sanded Sitka spruce panels sawn lengthwise, suitable for cabinetry, >6mm thick, untreated. Under HTS 4407.12.00.18 as other sawn Sitka spruce. Offers clean, workable surface for joinery.
Planed Sitka Spruce Rafters 2x10
Sitka spruce rafters sawn and planed for roof framing, 2x10 size exceeding 6mm, end-jointed, untreated. HTS 4407.12.00.18 'other' Sitka spruce sawn wood. Lightweight yet strong for roofing applications.