Creosote Fir Railway Ties
Heavy-duty fir crossties treated with creosote for railroad track underlayment, sawn to standard 7x9x8.5 ft specs. HTS 4407.12.00.02 due to fir coniferous wood >6mm with creosote preservation. Meets AREMA standards for durability.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If Hem-fir mixed species
Subheading note defines Hem-fir mixes under 4407.14 separately from pure fir.
If cut to length and branded
Railway ties with additional working like branding may fall under other wood articles.
If in rough hewn state under 6mm equiv
Rough wood not sawn lengthwise uses Chapter 44 heading 4403.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Comply with FRA creosote penetration specs; use rail-specific NAICS; inspect for cracks post-treatment
Related Products under HTS 4407.12.00.02
Painted Spruce Sawn Lumber 2x4
Sawn spruce lumber measuring 2 inches by 4 inches by 8 feet, treated with paint to protect against moisture and insects. Classified under HTS 4407.12.00.02 because it is coniferous spruce wood exceeding 6mm thickness, planed, and surface-treated with paint preservative. Used primarily for exterior construction framing.
Creosote Treated Fir Deck Boards
Planed fir decking boards, 5/4 x 6 inches, pressure-treated with creosote for outdoor durability against rot and termites. Fits HTS 4407.12.00.02 as coniferous fir wood over 6mm thick with creosote preservative treatment. Ideal for patio and railing construction.
Stain-Finished Spruce Studs 2x6
Sanded spruce studs 2x6x10 feet with protective stain finish to prevent weathering in exposed applications. Under HTS 4407.12.00.02 for its spruce origin, thickness >6mm, and stain preservative treatment. Commonly used in wall framing for humid climates.
Preservative-Coated Fir Beam 4x8
Large fir structural beam 4x8x12 feet coated with chemical wood preservative for bridge and dock use. HTS 4407.12.00.02 applies due to fir species, sawn >6mm, and 'other preservative' treatment. Engineered for heavy load-bearing outdoors.
Painted Fir Siding Panels
Sliced and planed fir siding boards pre-painted for weather resistance in residential exteriors. Classified in HTS 4407.12.00.02 as painted fir sawn wood exceeding 6mm thickness. Provides primed surface ready for final coats.
Stained Spruce Fencing Rails
Sawn spruce rails for split-rail fencing, stained with UV protectant, 3x8x10 feet. Fits HTS 4407.12.00.02 as treated spruce exceeding 6mm thickness. Rustic finish for farm and ranch boundaries.