Pitch Pine Sawn Planks 1x12
Pitch pine (Pinus rigina) sawn planks 1 inch by 12 inches wide, sanded surface for flooring underlayment. HTS 4407.11.0047 applies to this untreated southern yellow pine species lumber over 6mm thick, sliced lengthwise.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If from spruce, fir, or mixed S-P-F sources
Non-pine conifers like spruce use separate subheadings from pure pine lumber.
If cut into dowels or small turned articles
Pine dowels and similar small wood articles classify under heading 4421.
If assembled into wooden doors from sawn pine
Doors and similar joinery products from pine move to heading 4418.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include Southern Pine grading stamps from accredited agencies
• Declare exact moisture content on commercial invoice for duty assessment
• Separate from longleaf pine shipments if different treatment histories
Related Products under HTS 4407.11.00.47
Southern Yellow Pine Lumber 2x4
Sawn southern yellow pine (Pinus taeda) lumber measuring 2 inches by 4 inches by 8 feet, planed and end-jointed for structural use. Classified under HTS 4407.11.0047 as untreated coniferous wood sawn lengthwise, thickness exceeding 6mm, specifically southern yellow pine species. Used primarily in residential framing and construction.
Loblolly Pine S4S Boards 1x6
Surfaced four sides (S4S) loblolly pine (Pinus taeda) boards, 1 inch thick by 6 inches wide, untreated southern yellow pine for siding and trim. Meets HTS 4407.11.0047 criteria as sawn coniferous wood exceeding 6mm thickness from specified pine species, sanded but not chemically treated.
Slash Pine Dimensional Lumber 2x6
Slash pine (Pinus elliottii) 2x6 joist lumber, sawn lengthwise, planed, thickness 38mm exceeding 6mm requirement. Specifically qualifies for HTS 4407.11.0047 as untreated southern yellow pine species variant used in floor joists and rafters.
Shortleaf Pine Studs 2x4x92-5/8
Pre-cut shortleaf pine (Pinus echinata) wall studs at 92-5/8 inches for precut construction packages, sawn and end-jointed. Falls under HTS 4407.11.0047 as untreated southern pine sawn lengthwise exceeding 6mm thickness.
Virginia Pine Framing Lumber 2x10
Virginia pine (Pinus virginiana) 2x10 beams for roof framing, sawn lengthwise, planed edges, untreated. Specifically classified HTS 4407.11.0047 as qualifying southern pine species sawn wood exceeding 6mm thickness.
Longleaf Pine Select Boards 1x8
Select grade longleaf pine (Pinus palustris) 1x8 boards, sawn, sanded, and end-jointed for cabinetry backs. HTS 4407.11.0047 covers this untreated heartwood southern pine lumber thickness over 6mm.