Rough Slash Pine Timbers 4x6
Heavy 4x6 timbers rough sawn from Slash pine (Pinus elliottii), a designated southern yellow pine, lengthwise sliced with thickness exceeding 6 mm and no end-jointing or surfacing. Classified precisely under HTS 4407.11.0046 for its untreated rough coniferous pine profile. Used in structural beams and heavy framing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If mixed S-P-F species
Spruce-pine-fir blends from mixed stands use subheading 4407.13 rather than specific Pinus taeda/elliottii.
If processed into pellets
Agglomerated sawdust or shavings from this pine become wood pellets under fuel product subheadings.
If plywood manufactured
Layered into plywood panels moves from sawn lumber to Chapter 44 heading 4412 for veneered products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Measure thickness pre-import to confirm >6 mm; thinner stock may fall under plywood or veneer headings
• Use ISPM 15 compliant packaging for shipping to prevent quarantine issues with rough lumber
• Label shipments clearly as 'rough southern yellow pine' with species list to facilitate customs review
Related Products under HTS 4407.11.00.46
Rough Southern Yellow Pine Lumber 2x4
Rough sawn lumber measuring 2 inches by 4 inches, sourced from Loblolly pine (Pinus taeda), a type of southern yellow pine, with thickness exceeding 6 mm and no planing, sanding, or end-jointing applied. This coniferous wood is chipped lengthwise and classified under HTS 4407.11.0046 due to its specific pine species and rough condition. Commonly used in construction framing where surface finishing occurs on-site.
Rough Loblolly Pine Boards 1x6
1x6 inch rough cut boards from Loblolly pine (Pinus taeda), southern yellow pine variety, sawn lengthwise with thickness over 6 mm in untreated rough state. Meets HTS 4407.11.0046 specifications for specific coniferous pine species not subjected to surfacing treatments. Ideal for sheathing, subflooring, and rustic applications.
Rough Shortleaf Pine Planks 2x8
2x8 planks rough sawn lengthwise from Shortleaf pine (Pinus echinata), qualifying southern yellow pine, exceeding 6 mm thickness in untreated condition without planing. Fits HTS 4407.11.0046 for rough, specific coniferous pine species. Suitable for decking bases and joists.
Rough Pitch Pine Beams 6x8
Large 6x8 beams cut rough from Pitch pine (Pinus rigida), a southern yellow pine type, sawn lengthwise over 6 mm thick without sanding or jointing. Directly matches HTS 4407.11.0046 criteria for untreated rough coniferous wood of named species. Applied in bridge construction and heavy timbering.
Rough Longleaf Pine Studs 2x6
Standard 2x6 studs rough sawn from Longleaf pine (Pinus palustris), premium southern yellow pine, thickness >6 mm, untreated and unplaned. HTS 4407.11.0046 applies to this specific rough coniferous pine profile. Preferred for high-strength framing in residential builds.
Rough Virginia Pine Lumber 1x12
Wide 1x12 rough lumber from Virginia pine (Pinus virginiana), included southern yellow pine species, lengthwise sawn exceeding 6 mm thick in raw form. Classifies under HTS 4407.11.0046 for untreated rough condition of listed pines. Used for paneling and wide board applications.