Lodgepole Pine Fence Boards
Rough sawn lodgepole pine fence boards, 1x6 inch rough texture, chipped lengthwise, untreated Pinus contorta exceeding 6mm. HTS 4407.11.0045 covers other untreated lodgepole sawn wood. Standard for split-rail style fencing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If processed into wood pellets
By-products agglomerated into pellets per subheading note 4401.31.
If veneer sheets ≤6mm
Peeled into thin veneers uses Chapter 44 veneer heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Phytosanitary cert mandatory for fence wood; note 'not pressure-treated'; stack with spacers to prevent mold
Related Products under HTS 4407.11.00.45
Lodgepole Pine Lumber 2x4
Sawn lodgepole pine (Pinus contorta) boards measuring 2 inches by 4 inches by 8 feet, planed and end-jointed for structural use, exceeding 6mm thickness. Classified under HTS 4407.11.0045 as 'other' lodgepole pine not treated, sawn lengthwise from coniferous wood. Ideal for framing in residential construction due to its straight grain and availability in western US forests.
Lodgepole Pine S4S Boards
Surfaced four sides (S4S) lodgepole pine boards, 1x6 inch profile, sliced lengthwise and sanded, over 6mm thick, untreated. HTS 4407.11.0045 applies to this 'other' category of non-treated lodgepole pine sawn wood from Pinus contorta. Commonly used for paneling, shelving, or rustic furniture.
Untreated Lodgepole Pine Timbers
Large dimension lodgepole pine timbers, sawn to 6x6 inch cross-section, peeled and planed, exceeding 6mm thickness, not chemically treated. Falls under HTS 4407.11.0045 as 'other' lodgepole pine (Pinus contorta) sawn lengthwise. Used in heavy construction like bridges or log homes.
Lodgepole Pine Interior Trim Boards
Planed and sanded lodgepole pine trim boards, 1x4 inch size, sawn lengthwise from Pinus contorta logs, untreated and over 6mm thick. Classified in HTS 4407.11.0045 for other non-treated lodgepole pine sawn wood. Perfect for baseboards and door casings in cabin-style interiors.
Planed Lodgepole Pine Planks
Wide planed planks from lodgepole pine (Pinus contorta), 1x12 inch by 12 feet, sliced and end-jointed, thickness >6mm, untreated. HTS 4407.11.0045 covers this as other sawn coniferous lodgepole pine. Suited for tabletops, countertops, or wide paneling.
Lodgepole Pine Sawn Beams
Heavy sawn beams from lodgepole pine, 8x10 inch section, chipped lengthwise and sanded, untreated, exceeding 6mm. Under HTS 4407.11.0045 as other Pinus contorta sawn wood. Used in timber framing for barns and homes.