Rough Lodgepole Pine Studs 2x4x8ft
8-foot rough sawn lodgepole pine studs, 2x4 cross-section, Pinus contorta species, exceeding 6mm thick, untreated for residential framing. Classified under HTS 4407.11.0044 for rough lodgepole pine sawn wood.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If made into posts/structural timbers
Assembled or shaped posts and beams classify in 4418 as constructed wood.
If eastern white pine
Other pine species like Pinus strobus have distinct statistical codes.
If pallet materials
Wood specifically shaped for pallets falls under Chapter 44 heading 4415.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Specify exact lengths in documentation to confirm not pre-cut for specific end-use
• Inspect for wane (bark remnants) which is acceptable in rough but document to avoid disputes
• Use ISPM 15 compliant packaging if pallets are wood to prevent quarantine issues
Related Products under HTS 4407.11.00.44
Rough Lodgepole Pine Lumber 2x4
Rough sawn lodgepole pine (Pinus contorta) boards measuring 2 inches by 4 inches by various lengths, exceeding 6mm thickness, with bark removed but not planed, sanded, or end-jointed. Classified under HTS 4407.11.0044 as rough coniferous wood of pine species, specifically lodgepole pine, in its primary processed form for further manufacturing or construction.
Rough Lodgepole Pine Timbers 6x8
Large rough sawn lodgepole pine timbers, 6x8 inch cross-section, used for structural beams, cut lengthwise with thickness exceeding 6mm, untreated and not further processed. Meets HTS 4407.11.0044 criteria for rough lodgepole pine (Pinus contorta) coniferous sawn wood.
Rough Lodgepole Pine Planks 1x12
Wide rough cut lodgepole pine planks, nominal 1x12 inch size, sawn lengthwise exceeding 6mm thickness, suitable for siding or paneling after further processing. Specifically classified as rough Pinus contorta under HTS 4407.11.0044.
Rough Lodgepole Pine Boards 2x6
Standard construction-grade rough sawn lodgepole pine 2x6 boards from Pinus contorta, thickness over 6mm, not planed or treated, for framing and structural use. Fits HTS 4407.11.0044 as rough, untreated lodgepole pine lumber.
Rough Lodgepole Pine Siding Boards
Rough textured lodgepole pine boards for exterior siding, sawn from Pinus contorta, thickness >6mm, not sanded or profiled. HTS 4407.11.0044 applies to this untreated rough coniferous pine lumber.
Rough Lodgepole Pine Beam Blanks 4x6
Rough sawn 4x6 lodgepole pine beam blanks from Pinus contorta, over 6mm thick, for custom beam fabrication, untreated. Perfectly matches HTS 4407.11.0044 rough lodgepole pine specifications.