Red Pine Sawn Boards 1x6
Thickness-planed boards from red pine (Pinus resinosa), nominally 1 inch thick by 6 inches wide, sliced lengthwise and exceeding 6mm, untreated for interior applications like paneling. Fits HTS 4407.11.0043 as 'other' category for sawn red pine, distinguished by species-specific grading.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If from spruce, fir, or hemlock species
Other coniferous species like S-P-F mixes fall under 4407.12, separate from pine-specific headings.
If shaped or profiled along edges
Profiled or molded sawn wood shifts to heading 4418 for cellular or profiled wooden articles.
If specifically lodgepole or ponderosa pine
Named pine varieties like lodgepole have dedicated subheadings before the 'other' Eastern white/red pine category.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain third-party species verification certificates for Pinus resinosa to comply with Lacey Act declarations; check for blue stain defects common in red pine and declare if present; use proper ISPM 15 marking if any heat treatment applied despite 'not treated' status
Related Products under HTS 4407.11.00.43
Eastern White Pine Lumber 2x4
Sawn lumber from Eastern white pine (Pinus strobus), measuring 1.5 inches thick by 3.5 inches wide by various lengths exceeding 6mm thickness, planed and sanded for smoothness. Classified under HTS 4407.11.0043 as 'other' sawn coniferous pine wood not treated, specifically Eastern white pine, used primarily for framing and construction.
Planed Eastern White Pine Beams 4x8
Large structural beams sawn from Eastern white pine, planed on all four sides, thickness over 6mm, used in timber framing without chemical treatments. HTS 4407.11.0043 covers this as untreated 'other' Eastern white pine sawn lengthwise.
Sanded Red Pine Planks 1x8
Sanded surface planks from red pine trees, sliced to exceed 6mm thickness, ideal for flooring or shelving, untreated to preserve natural grain. Classified in 4407.11.0043 as 'other' sawn red pine (Pinus resinosa).
Eastern White Pine Studs 2x6
Construction-grade studs sawn lengthwise from Pinus strobus, end-trimmed and planed, thickness exceeding 6mm, untreated for residential framing. HTS 4407.11.0043 specifies 'other' Eastern white pine in this category.
Red Pine S4S Lumber 2x10
Surfaced four sides (S4S) lumber from red pine, sawn to 1.5x9.25 inches actual, over 6mm thick, untreated for barn or garage builds. Falls under HTS 4407.11.0043 as other untreated red pine sawn wood.
Untreated Eastern White Pine Shiplap
Shiplap profile boards sawn from Eastern white pine, sanded and planed with overlapping edges, thickness >6mm, untreated for siding. Classified as 'other' in 4407.11.0043 despite profile if primarily sawn lumber.