Red Pine Rough Planks 2x10
Rough sawn red pine (Pinus resinosa) planks, 1.75 inches thick by 9.25 inches wide by 16 feet, coniferous softwood exceeding 6mm. Fits HTS 4407.11.0042 as untreated rough lumber for flooring joists and decking substructure.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If dimension pine lumber
Specific dimension-sawn pine (e.g., pre-cut studs) has dedicated rough subheading.
If bamboo of woody nature
Bamboo qualifying as 'woody nature' material uses separate coniferous-like heading.
If plywood made from these planks
Pine veneers laminated into plywood sheets classify under plywood headings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document chain of custody for species verification to prevent misclassification as generic pine
• Ensure no binder or compression indicating pellet form
• Prepare for CBP inspection on bark presence in rough lumber
Related Products under HTS 4407.11.00.42
Eastern White Pine Rough Lumber 2x4
Rough sawn lumber from Eastern white pine (Pinus strobus), measuring 1.5 inches thick by 3.5 inches wide by 8 feet long, exceeding 6mm thickness. This coniferous wood is sawn lengthwise without planing, sanding, or end-jointing, classified under HTS 4407.11.0042 as rough pine lumber not chemically treated. Used primarily for framing in construction.
Red Pine Rough Sawn Boards 1x6
Rough 1-inch by 6-inch boards from red pine (Pinus resinosa), sawn lengthwise with thickness over 6mm, untreated and not planed. Meets HTS 4407.11.0042 criteria for rough Eastern white pine and red pine lumber from coniferous species. Commonly used for barn siding and rustic furniture.
Eastern White Pine Rough Timbers 4x4
Heavy rough sawn timbers of Eastern white pine (Pinus strobus), 3.5x3.5 inches cross-section by 12 feet, thickness exceeding 6mm, coniferous and untreated. Classified in HTS 4407.11.0042 as rough pine lumber for structural applications like posts and beams.
Mixed Eastern White and Red Pine Rough Lumber
Bundled rough sawn lumber mixing Eastern white pine (Pinus strobus) and red pine (Pinus resinosa), average 2x6 dimensions over 6mm thick, lengthwise sawn coniferous wood. HTS 4407.11.0042 covers this untreated rough pine combination for general construction.
Eastern White Pine Rough Beams 6x8
Large rough sawn beams from Eastern white pine, 5.5x7.25 inches by 20 feet long, thickness well over 6mm, untreated coniferous. Classified under HTS 4407.11.0042 for rough structural pine timber in timber framing.
Red Pine Rough Studs 2x4x92-5/8
Pre-cut length rough red pine (Pinus resinosa) studs at 1.5x3.5x92-5/8 inches for wall framing, thickness >6mm, sawn lengthwise untreated. HTS 4407.11.0042 applies to these rough dimension pine pieces.