Douglas Fir Split Piles for Construction
Roughly split piles from Douglas fir (coniferous), pointed for driving into ground in construction and piling applications. HTS 4404.10.00.90 covers these as other coniferous piles not sawn lengthwise, maintaining natural split form. Used in temporary structures and foundations.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If for coniferous wood coniferous sawn lengthwise
Sawn lengthwise coniferous wood shifts to 4406.91 regardless of end use.
If by-products made into briquettes
Sawdust or chips from splitting agglomerated into briquettes >25mm go to 4401.32.
If pallet-sized and assembled
Assembled into pallets, even roughly, classifies under 4415 for pallet wood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Confirm Douglas fir as coniferous with botanical verification; ensure piles are split not sawn to stay in 4404; prepare for ISPM-15 wood packaging regulations even if not packaged
Related Products under HTS 4404.10.00.90
Coniferous Split Fence Poles
Roughly split poles made from coniferous wood like pine or spruce, used primarily for fencing and structural support in agricultural settings. They are pointed at one end but not sawn lengthwise, fitting 4404.10.00.90 as split poles of coniferous wood that are other than specific statistical categories. These poles retain their natural, unworked form suitable for direct outdoor use.
Pine Wooden Stakes for Vineyards
Pointed pine wood stakes, roughly split and not sawn lengthwise, designed for supporting grapevines and trellises in vineyards. Classified under HTS 4404.10.00.90 as coniferous stakes that are pointed but unworked beyond basic splitting. Ideal for agricultural applications where natural wood durability is needed.
Spruce Pointed Pickets for Gardens
Coniferous spruce pickets that are pointed but not sawn lengthwise, roughly shaped for garden borders and plant supports. Falls under 4404.10.00.90 as other coniferous pickets and stakes in their natural, minimally processed state. Commonly used in landscaping without further working.
Lodgepole Pine Tool Handle Blanks
Roughly trimmed lodgepole pine sticks, coniferous, suitable for manufacturing tool handles without turning or bending. Classified in 4404.10.00.90 as other coniferous wooden sticks in rough form. Provides straight-grained wood ideal for axe and shovel handles.
Coniferous Chipwood for Mulch
Chipwood from coniferous trees like fir, roughly produced and unworked, used as garden mulch or bedding. HTS 4404.10.00.90 includes this as other coniferous chipwood and the like, not agglomerated or further processed. Natural chipping without lengthwise sawing qualifies it.
Cedar Hoopwood for Barrels
Coniferous cedar hoopwood, split into staves for barrel and cooperage production, not sawn lengthwise. Fits 4404.10.00.90 as other hoopwood of coniferous species in rough form. Aromatic properties make it suitable for storage barrels.