Rough Yellow Poplar Turnery Blanks

Squared blanks from yellow poplar (Liriodendron tulipifera) prepared for lathe turning into tool handles. HTS 4403.97.0065 as rough wood prior to turning operations.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳ChinaFree+35.0%35%
🇲🇽MexicoFree+10.0%10%
🇨🇦CanadaFree+10.0%10%
🇩🇪GermanyFree+10.0%10%
🇯🇵JapanFree+10.0%10%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

4417.00.80Higher: 40.1% vs 35%

If lathe-turned into broom handles

Chapter 44 heading 4417 specifically for turned or shaped wooden tools.

4407.99.02Same rate: 35%

If sawn to exact dimensions >6mm

Precision sawn blanks qualify as lumber rather than rough wood.

4421.99.40.00Lower: 15.1% vs 35%

If for paintbrush handles

Specific wooden articles for artist's materials have dedicated codes.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Cut blanks slightly oversize to allow for turning material loss

Mark grain direction on each blank for optimal tool handle strength

Dry to 12-15% MC before turning to prevent warping