Poplar Pulpwood Logs
Rough-cut logs from Populus species such as black poplar, specifically harvested and prepared as pulpwood for the paper manufacturing industry. These logs are in the rough state, typically stripped of bark but not further processed, measuring around 4-6 feet in length and 4-12 inches in diameter to meet pulpwood specifications. Classified under HTS 4403.97.0022 due to their poplar origin and designation for pulp production.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sawn or chipped lengthwise and over 6mm thick
Logs processed beyond rough state into lumber or chips move to Chapter 44 heading 4407 for coniferous/non-coniferous sawn wood.
If used for fuel as coniferous wood in logs
Fuel wood in logs, billets, or twigs classified by species in 4401; pulpwood designation shifts it to 4403.
If other hardwood species like eucalyptus instead of poplar
Pulpwood classification remains in 4403.97 but subheading changes to other species, altering duty rates.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Populus spp. (poplar/aspen) via phytosanitary certificates to confirm HTS 4403.97.0022 classification
• Obtain ISPM 15 heat treatment documentation for wood packaging; untreated pulpwood may face fumigation requirements at port
• Measure log dimensions and moisture content; exceeding rough-squared limits risks reclassification to sawn lumber under 4407
Related Products under HTS 4403.97.00.22
Aspen Pulpwood Rounds
Unprocessed round bolts of quaking aspen (Populus tremuloides) harvested for pulpwood, debarked and cut to standard pulp lengths of 42-52 inches. Ideal for kraft pulp production in papermaking due to aspen's high cellulose content and low density. Falls under HTS 4403.97.0022 as rough poplar/aspen pulpwood.
Hybrid Poplar Pulpwood Billets
Short billets from fast-growing hybrid poplar clones (Populus deltoides x nigra), rough in form and bark-removed, optimized for pulpwood chipping in pulp mills. These 18-24 inch lengths provide high yield for tissue and newsprint production. HTS 4403.97.0022 applies to all Populus spp. pulpwood.
Debarked Poplar Pulpwood for Kraft Pulp
Bark-free poplar logs cut to 5-foot lengths, sourced from managed plantations for chemical kraft pulping processes in paper production. The rough condition preserves fiber integrity for optimal pulp yield. Specifically classified as poplar pulpwood under HTS 4403.97.0022.
Quaking Aspen Pulpwood Bundles
Bundled rough bolts of quaking aspen from North American forests, standardized at 4-inch top diameter for efficient pulpwood transport and processing. Primarily used for high-brightness printing papers. HTS 4403.97.0022 covers aspen as Populus pulpwood.