Rough Birch Timber Logs 20cm x 20cm
Unprocessed birch (Betula spp.) logs with a minimum cross-sectional dimension of 20 cm, stripped of bark but left in the rough state for further processing into lumber. These fall under HTS 4403.95.01.30 as 'other' birch wood in the rough exceeding 15 cm cross-section, distinct from squared or treated wood.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If smallest cross-sectional dimension is under 15 cm
Birch wood logs with cross-sections below 15 cm fall into the specific subheading for smaller dimensions within the same birch rough wood category.
If sourced from mixed hemlock-fir stands rather than pure birch
Hem-fir mixed softwoods in the rough are classified under 4407.14 per subheading note, not coniferous birch which stays in 4403.
If identified as eucalyptus or other tropical hardwood
Rough wood from non-birch species like eucalyptus shifts to 'other' hardwood categories under 4403.99, based on precise botanical identification.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Betula spp. (birch) via phytosanitary certificates to meet 4403 requirements and avoid reclassification
• Measure and document smallest cross-sectional dimension (must exceed 15 cm) with photos/measurements to confirm HTS 4403.95.01.30 eligibility
• Ensure bark/sapwood removal complies with 'roughly squared' exclusions; excessive processing risks shifting to Chapter 44 sawn wood headings
Related Products under HTS 4403.95.01.30
Birch Firewood Rounds 18cm Diameter
Rough-cut birch rounds from Betula spp. with 18 cm diameter cross-section, minimally processed by debarking for use as fireplace or stove fuel. Classified in HTS 4403.95.01.30 as unsawn birch wood in the rough exceeding 15 cm, not meeting criteria for sawn or pelletized forms.
Debarked Birch Construction Timbers 25cm Square
Large birch (Betula spp.) timbers debarked with 25 cm cross-sectional dimension, in rough form for structural building applications. HTS 4403.95.01.30 applies to these 'other' unsquared birch logs over 15 cm, prior to milling into finished lumber.
Birch Veneer Production Logs 16cm Cross-Section
Rough birch logs (Betula spp.) with 16 cm minimum cross-section, prepared for rotary peeling into veneer sheets. Fits HTS 4403.95.01.30 as other birch rough wood exceeding 15 cm, not yet sawn or machined.
Industrial Birch Pulpwood Rounds 22cm Diameter
Rough birch pulpwood rounds from Betula spp., 22 cm cross-section, debarked for pulping into paper products. HTS 4403.95.01.30 covers these as other large-dimension birch in the rough state.
Furniture-Grade Birch Bole Logs 30cm Cross-Section
High-quality birch bole logs (Betula spp.) with 30 cm cross-section, rough debarked for premium furniture stock. Under HTS 4403.95.01.30 as other birch rough wood with large dimensions.
Birch Turnery Stock Rounds 17cm Diameter
Rough birch rounds (Betula spp.) sized 17 cm diameter for lathe turning into tool handles or decorative items. HTS 4403.95.01.30 for other birch rough exceeding 15 cm cross-section.