Rough Squared Beech Timber
Beech wood (Fagus spp.) roughly squared into timber blocks, with bark removed but retaining natural rough surfaces for further processing. Falls under HTS 4403.94.01.00 as 'other' non-coniferous rough wood of beech, prior to planing or sawing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If planed or profiled on one or more faces
Planed beech wood veneer logs or sheets classify under heading 4408, distinct from roughly squared rough wood.
If from other nonconiferous species like oak
Similar rough squared wood from non-beech species uses different species-specific subheadings in 4403.99.
If further processed into plywood of beech
Plywood with beech face veneers shifts to heading 4412 for densified or laminated wood products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill certificates confirming rough squaring only, no machine planing; check for ISPM 15 compliance if bundled; avoid bundling with finished products to prevent set classification
Related Products under HTS 4403.94.01.00
Rough Beech Firewood Logs
Unprocessed beech wood logs from Fagus species, roughly cut and stripped of bark but not squared, intended for firewood use. Classified under HTS 4403.94.01.00 as 'other' beech wood in the rough, not further processed beyond basic preparation. Meets chapter note including wood of woody nature in rough state.
Beech Wood Rounds for Tool Handles
Rough beech (Fagus spp.) wood rounds, bark-stripped and minimally squared, destined for carving into tool handles. HTS 4403.94.01.00 covers this as 'other' beech wood in the rough state, before any turning or shaping.
Unstripped Beech Logs for Furniture Blanks
Natural beech (Fagus spp.) logs with partial bark intact, in rough unsquared form for producing furniture blanks. Classified in HTS 4403.94.01.00 as other beech wood in the rough, allowing sapwood presence per heading description.
Rough Beech Billets for Steam Bending
Short, roughly squared billets of beech wood (Fagus spp.), bark-free for steam bending in chair manufacturing. HTS 4403.94.01.00 applies to these as other rough beech wood not yet bent or machined.
Beech Wood Stumps in the Rough
Rough beech (Fagus spp.) stumps and roots, minimally processed with bark partially on, for specialty woodworking. Under HTS 4403.94.01.00 as other beech rough wood, including woody material per chapter note.
Rough Beech Poles for Construction
Naturally rounded beech (Fagus spp.) poles, stripped of bark but unsawn, for rustic construction fencing. HTS 4403.94.01.00 for other rough beech wood in pole form, not squared or machined.