Beech Pallet Stock Rough Large
Rough cut beech (Fagus spp.) blocks over 15 cm for pallet and crate manufacturing, untreated. Classifies under HTS 4403.93.01.00 meeting large cross-section beech wood criteria. Economical alternative to oak pallet stock.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If made into pallets
Assembled wooden pallets and crates classified under heading 4415.
If rough Norway spruce
Coniferous pallet stock rough wood under different species subheading.
If sawn into pallet cants
Pre-cut pallet components considered other wood articles under 4421.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Pallet stock must meet specific density minimums (0.55 g/cm³) for structural use
• Pre-mark for heat treatment capacity post-import per ISPM 15 standards
• Sort by heartwood/sapwood ratio; sapwood limits durability
Related Products under HTS 4403.93.01.00
Beech Timber Logs for Furniture
Rough-cut beech (Fagus spp.) logs with smallest cross-sectional dimension over 15 cm, stripped of bark but not further processed. Classified under HTS 4403.93.01.00 as wood in the rough from beech species meeting the size requirement. Used primarily for high-end furniture manufacturing.
European Beech Round Logs
Unprocessed Fagus sylvatica logs from Europe, bark removed, smallest cross-section exceeding 15 cm. Fits HTS 4403.93.01.00 for rough beech wood not squared or further milled. Commonly exported for cabinetry and flooring production.
Beech Firewood Blocks Rough
Large rough beech blocks (Fagus spp.) for splitting into firewood, minimum 15 cm cross-section, untreated. HTS 4403.93.01.00 applies to this unprocessed wood in the rough state. Popular for residential and commercial firewood production.
Industrial Beech Cants 15cm+
Roughly squared beech cants (Fagus spp.) for industrial sawing, smallest cross-section 15 cm or greater. Classified HTS 4403.93.01.00 as wood in the rough, prior to extensive milling. Used in heavy construction timber production.
Beech Pulpwood Logs Large
Large diameter beech (Fagus spp.) logs for pulp and paper production, cross-section over 15 cm, bark stripped. HTS 4403.93.01.00 covers this rough state wood. Sourced from managed European forests.
Fagus Beech Construction Timbers
Rough Fagus beech timbers for structural use, minimum 15 cm cross-section, sapwood removed. Precisely matches HTS 4403.93.01.00 criteria for large-dimension beech rough wood. Suitable for beam production.