Stripped Teak Timbers
Teak wood timbers with bark and sapwood removed, roughly squared on two faces for initial handling. Falls under HTS 4403.42.00.00 as tropical teak wood in the rough state, prior to kiln drying or precise milling. Ideal for custom lumber production and marine applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sawn to thickness 6mm or less
Thinner sawn teak planks classify under specific sawn wood subheadings in 4407 rather than rough wood.
If other tropical species like ipe or mahogany
Non-teak tropical woods in rough form use 4403.49, while teak specifically gets 4403.42.
If plywood made from these logs
Teak veneered panels or plywood shift to heading 4412 for layered wood products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Ensure supplier provides chain-of-custody documentation for sustainable sourcing; check for sapwood removal compliance per HTS definition; avoid misclassification by confirming no planing beyond rough squaring
Related Products under HTS 4403.42.00.00
Rough Teak Logs
Unprocessed teak logs straight from the forest, stripped of bark but not squared, used primarily for high-end furniture and boat building. Classified under HTS 4403.42.00.00 as teak wood in the rough, whether or not stripped of bark or sapwood. Meets the 'in the rough' definition as it hasn't undergone significant processing beyond basic stripping.
Rough Squared Teak Blocks
Teak wood blocks roughly squared on all four sides from debarked logs, retaining natural rough surface texture. HTS 4403.42.00.00 covers this as teak 'roughly squared,' not fully machined. Used for carving, turning, and premium joinery blanks.
Debarked Teak Rounds
Cylindrical teak logs with bark removed but retaining round cross-section, untreated and in rough condition. Precisely matches HTS 4403.42.00.00 definition for teak wood in the rough, not stripped of sapwood. Common for burl veneers and specialty lumber.
Teak Flitch Bundles
Bundled teak logs prepared for sawing, bark-free with minimal sapwood removal, in rough unsawn form. HTS 4403.42.00.00 applies to these tropical teak flitches as wood in the rough. Essential for high-grade veneer and furniture stock.
Rough Teak Cant Blocks
Teak cants roughly hewn from logs, squared on opposite faces but irregular on sides, bark-free. Classified HTS 4403.42.00.00 as roughly squared teak wood in the rough. Used for beam stock and resawing into boards.
Unplaned Teak Lumber Rough
Teak lumber cut to length but left in rough, unplaned condition from stripped logs. HTS 4403.42.00.00 includes this as teak wood roughly squared or not. Prized for yacht decking and exterior millwork.