Larch Rough Timber
Rough-cut larch logs from Larix species, stripped and roughly squared, used for construction lumber feedstock. Classified in HTS 4403.26.0164 as unspecified coniferous rough wood.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If other coniferous sawn timber, thickness >6mm
Minimal sawing or planing advances to lumber tariff lines.
If processed into wood pellets from larch waste
Agglomerated byproducts meet subheading 4401.31 pellet definition.
If plywood made from larch veneers
Laminated panels from rough wood fall under Chapter 44 plywood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Pre-verify with CBP rulings for species-specific treatment requirements
• Use calibrated scales for weight declarations to match volume calcs
• Segregate from sawn bundles to prevent commingling penalties
Related Products under HTS 4403.26.01.64
Rough Pine Logs
Unprocessed pine logs from coniferous trees, stripped of bark but not squared, measuring over 6 inches in diameter. Classified under HTS 4403.26.0164 as 'other' coniferous logs and timber in the rough, not meeting specific size exclusions for diameter or length.
Bark-Stripped Spruce Timber
Rough spruce timber from Picea species, roughly squared on two sides for handling, intended for sawmills. Falls under HTS 4403.26.0164 as other coniferous logs not qualifying for excluded species or sizes.
Rough Fir Logs
Unstripped fir logs from Abies species, in the rough state with sapwood intact, diameter 12-24 inches. HTS 4403.26.0164 covers these as other coniferous timber not specified elsewhere.
Cedar Logs in the Rough
Western red cedar logs, bark removed, roughly hewn for export to mills. HTS 4403.26.0164 applies to these other coniferous logs exceeding exclusion sizes.
Rough Hemlock Timber
Mountain hemlock logs in rough form, sapwood stripped, for further processing. Fits HTS 4403.26.0164 as other coniferous rough timber.
Douglas Fir Rough Logs
Rough Douglas fir logs, bark-free, diameter >20cm, length >3m, roughly squared. HTS 4403.26.0164 for other coniferous logs and timber.