Debarked Western Red Cedar Flitches

Long flitches (unsawn log sections) of Thuja plicata, debarked and ready for sawing, in rough condition. HTS 4403.26.0155 applies to these coniferous timber pieces as Western red cedar logs. Valued for aromatic properties in closet linings and paneling.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳ChinaFree+35.0%35%
🇲🇽MexicoFree+10.0%10%
🇨🇦CanadaFree+10.0%10%
🇩🇪GermanyFree+10.0%10%
🇯🇵JapanFree+10.0%10%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

4403.22.01Same rate: 35%

If from fir species

Fir logs (Abies spp.) have their own subheading within coniferous rough wood.

4421.91.30.00Lower: 20.7% vs 35%

If assembled into wooden frames

Rough wood joined into frames for commercial use becomes worked articles in 4421.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Photograph logs pre-shipment matching invoice descriptions; comply with USDA APHIS wood import regulations; use licensed scalers for third-party volume certification

Related Products under HTS 4403.26.01.55

Western Red Cedar Logs

Rough-cut logs from Thuja plicata, typically stripped of bark but not further processed, measuring 12-24 inches in diameter and 8-40 feet in length. Classified under HTS 4403.26.0155 as coniferous wood in the rough, specifically Western red cedar logs and timber not squared or planed. Ideal for sawmills producing lumber for construction and outdoor projects.

Thuja Plicata Timber Rounds

Round timber sections from Western red cedar trees, bark-removed and cut to standard lengths for export, with diameters up to 30 inches. Falls under HTS 4403.26.0155 as unprocessed coniferous logs and timber specifically identified as Western red cedar. Commonly used in shingle manufacturing and heavy construction.

Western Red Cedar Debarked Bolts

Short-length bolts (4-8 feet) of Thuja plicata wood, debarked and in the rough state, suitable for lathe processing into posts or shakes. HTS 4403.26.0155 covers these as coniferous logs and timber of Western red cedar not yet squared. Popular for rustic fencing and cedar shake production.

Thuja Plicata Rough Sawn Timbers

Large-dimension timbers from Western red cedar, roughly cut but retaining rough surfaces, stripped of sapwood. Precisely matches HTS 4403.26.0155 for unsquared coniferous logs and timber of this species. Used in beam construction and boat building.

Western Red Cedar Export Logs

High-grade Thuja plicata logs prepared for international shipment, bark-free and graded for clear wood yield. Classified in HTS 4403.26.0155 as rough state coniferous wood logs specific to Western red cedar. Primarily destined for Japanese markets for housing lumber.

Thuja Plicata Shingle Blocks

Rough blocks cut from Western red cedar bolts, sized for shingle saws, bark removed but surfaces irregular. Fits HTS 4403.26.0155 criteria for unsquared logs and timber of this coniferous species. Essential raw material for cedar roof shingles.