Stripped Abies Grandis Fir Logs
Grand fir (Abies grandis) logs stripped of sapwood, in rough form for veneer production. HTS 4403.24.0142 covers these as 'other fir' coniferous logs and timber, not squared beyond rough preparation. Commonly used in plywood and decorative panel manufacturing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If processed into veneer sheets
Rough logs become Chapter 44 Heading 4408 veneer after slicing or peeling, changing from rough state.
If Pinus spruce rather than Abies fir
Pine species rough wood uses different subheadings (4403.12) based on coniferous genus distinction.
If further manufactured into plywood
Completed plywood panels from fir veneers fall under Heading 4412 for densified or laminated wood products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Label shipments with scientific species name (Abies grandis) and rough dimensions to support HTS classification
• Check for CITES restrictions if logs exceed certain sizes, though most fir species are not listed
• Maintain chain-of-custody documentation for sustainably sourced wood to meet buyer and regulatory demands
Related Products under HTS 4403.24.01.42
Rough Fir Logs for Construction Lumber
Unprocessed fir logs (Abies spp.) stripped of bark but roughly squared, measuring over 6 inches in diameter. Classified under HTS 4403.24.0142 as 'other fir; balsam' in the rough state, not further sawn or chipped. Used primarily for producing dimensional lumber in building applications.
Balsam Fir Timber for Pulpwood
Rough balsam fir (Abies balsamea) timber logs, bark-removed and roughly squared for pulp production. Fits HTS 4403.24.0142 as 'other fir; balsam' coniferous wood in the rough, with diameters exceeding 150mm. Ideal for chipping into wood pulp for paper manufacturing.
Rough Balsam Fir Poles for Utility Use
Balsam fir poles in the rough, debarked but not machined, suitable for utility or fencing applications. Classified as 'other fir; balsam' under HTS 4403.24.0142 for coniferous rough timber. Lengths typically 20-40 feet with minimum 6-inch top diameter.
Debarked Noble Fir Logs
Noble fir (Abies procera) logs debarked and roughly squared for export to sawmills. HTS 4403.24.0142 applies to these 'other fir' coniferous rough logs, primarily from Pacific Northwest forests. Used for high-grade appearance lumber.
Rough Fir Cant Blocks for Sawn Lumber
Fir species cant blocks (rectangular rough timber) from Abies spp., minimally squared for further sawing. Covered by HTS 4403.24.0142 as 'other fir; balsam' rough coniferous wood. Dimensions typically 6x8 inches cross-section.
Balsam Fir Log Bundles for Export
Bundled balsam fir logs in rough state, sapwood stripped, for overseas sawmilling. HTS 4403.24.0142 designates these as 'other fir; balsam' coniferous logs and timber. Average length 32 feet, sorted by grade.